Carbon wheels / fitment

General queries KR Bikes
Post Reply
Willybland
Newbie
Posts: 21
Joined: Sun Jan 01, 2017 12:24 pm

Carbon wheels / fitment

Post by Willybland » Tue Sep 05, 2017 2:26 pm

Hi all , I wonder if anyone can help me out .Im after some carbon fibre wheels to fit the kr1s which is proving quite hard. The closest I've got so far is some BST wheels that are for the later aprillia rs 250 . We think they will work . But has anyone fitted rs250 wheels into a standard KR1s .Does anyone know of alignment / chain / disc problems I may have. I'm in talks with BST and they have mentioned I will loose my speedo drive as the later rs 250 didn't have one . Is there anyway around this as I would really like to keep this working . The wheels are quite pricey and don't wanna buy them until I can be sure lol . Thanks for any help . Will

SP_BOTT
Oil Injector
Posts: 659
Joined: Sun Sep 30, 2007 5:59 pm

Re: Carbon wheels / fitment

Post by SP_BOTT » Tue Sep 05, 2017 6:03 pm

Have a read through this thread, unfortunately no pics since Photo...did the deed. But think he fitted carbon wheels in the end. Not sure if you'd seen it or not??

viewtopic.php?f=7&t=3893

Willybland
Newbie
Posts: 21
Joined: Sun Jan 01, 2017 12:24 pm

Re: Carbon wheels / fitment

Post by Willybland » Tue Sep 05, 2017 10:39 pm

Hi thanks for your reply, I haven't seen this post but by the sounds of it other bikes may have been used to get to the final result as in Swing arm and forks . I'm trying if poss to keep the look of the kr1s best as possible but with lots of fancy bits . Maxton have just built me a rear shock and completely redone my forks with there own internals but it stilll looks stockish if that makes sense without going zxr forks etc. I might even paint the carbons if I can get some to keep it looking origional but nice knowing the performance is much better ;-) . I'm sure I can make it work and have been sent the drawings with sizings etc but would love to know if anyone else has done it before I jump in. Cheers . Will

pookie
Oil Injector
Posts: 716
Joined: Mon Nov 05, 2007 4:19 pm
Location: london

Re: Carbon wheels / fitment

Post by pookie » Wed Sep 06, 2017 4:09 pm

I know its not the same as having real carbon fibre wheels but for the same look at a fraction of the price you could have your wheels dipped, the results look very good, years ago dymag made wheels that fitted the kr1-s

User avatar
scooble
Premix Junkie
Posts: 1534
Joined: Thu Jul 27, 2006 12:47 pm
Location: West Sussex
Contact:

Re: Carbon wheels / fitment

Post by scooble » Wed Sep 06, 2017 6:23 pm

I fitted a CBR1000 Dymag Carbon Fibre front wheel to my KR1.
With custom discs made to fit.
Image

Willybland
Newbie
Posts: 21
Joined: Sun Jan 01, 2017 12:24 pm

Re: Carbon wheels / fitment

Post by Willybland » Thu Sep 07, 2017 5:36 pm

I have seen the carbon dipping it does look good but I'm a real bugger for real carbon . It's not just looks I am after really , It's the performance gain too. I have some mavics on my track bike and are great but again there no magnesium wheels for the Kr1/s. Actually there are but priced at just under £3000 and they are an old style 3 spoke which I'm not overly keen on. Looks good -I have actually found a front wheel by Dymag that will bolt straight in with speedo drive and discs but they don't make the back one under 5 inch so probably a bit wide . Bst do a 4.5 but didn't wanna mix the look up really even tho I'm told they are very simular but when spending that much I want them to be perfect really. Think I might bite the bullet and get the rs ones ordered :roll:

User avatar
scooble
Premix Junkie
Posts: 1534
Joined: Thu Jul 27, 2006 12:47 pm
Location: West Sussex
Contact:

Re: Carbon wheels / fitment

Post by scooble » Fri Sep 08, 2017 7:59 pm

I think Ben (Luders) fitted a 5" dymag to his race bike

Rocket
Heavy Smoker
Posts: 207
Joined: Wed Mar 24, 2010 7:29 pm
Location: skegness

Re: Carbon wheels / fitment

Post by Rocket » Fri Sep 08, 2017 8:45 pm

Yes I believe Ben had a 5" Dymag fitted to the rear of 1 of his race bikes, think it came from MJ (but could be mistaken), I have 5.25" astralite fitted to the rear of 1 of my race bikes and it fits fine, 5" magnesium CMA in another which also fits fine, only thing you need to do is modify the rear brake caliper rod to miss the wide tyre, RGV rear (4.50" x 17") is a good upgrade,
I have a pair of as new Dymags for sale,
front 3.5" x 17"
rear 5" x 17"
originally for a RGV but the rear with spacers will fit straight in and the front with spacers and possibly disc mods will fit,
will try this weekend and dig them out.

User avatar
martin
Premix Junkie
Posts: 1519
Joined: Sat Jan 13, 2007 10:35 pm
Location: luton,beds

Re: Carbon wheels / fitment

Post by martin » Sat Sep 09, 2017 3:34 am

Haven,not posted on here for a while for diff reasons,
The answer to your question is contact dymag. Dymag is a English company . Supply standard Kr1s wheels and they will make the carbon wheels that you want.
That is what I did with my zx636 ninja wheels.
BST is a South African company so you are wasting your time with them
current bikes
fully restored green/white kr1 b2
kawasaki zx636 heavily modified

pookie
Oil Injector
Posts: 716
Joined: Mon Nov 05, 2007 4:19 pm
Location: london

Re: Carbon wheels / fitment

Post by pookie » Sat Sep 09, 2017 3:19 pm

Hi Martin, Mr Willybland hasn't indicated his location so he might be from South Africa.

Willybland
Newbie
Posts: 21
Joined: Sun Jan 01, 2017 12:24 pm

Re: Carbon wheels / fitment

Post by Willybland » Sat Sep 09, 2017 6:27 pm

Thanks guys for giving me all this info , really appreciate it. I have contacted dymag Martin but they don't do the custom wheels now as it wasn't cost effective apparently with moldings etc but they do a 3 spoke magnesium wheel that will go straight in but it's expensive in my opinion for what it it . Well that's good news because they told me a 5 inch wouldn't fit but if it clears swingarm then I don't mind making spacers etc . Rocket if you could send me a price and a pic of the wheels you have for sale that would be great as I still havnt bought any as yet . Many thanks everyone

Rocket
Heavy Smoker
Posts: 207
Joined: Wed Mar 24, 2010 7:29 pm
Location: skegness

Re: Carbon wheels / fitment

Post by Rocket » Sat Sep 09, 2017 7:02 pm

Will get some photos tomorrow of the Dymags for you Willybland, when i find them.
checked today and the CMA is alloy not magnesium, the 3xv wheels are the magnesium wheels.

Rocket
Heavy Smoker
Posts: 207
Joined: Wed Mar 24, 2010 7:29 pm
Location: skegness

Re: Carbon wheels / fitment

Post by Rocket » Sun Sep 17, 2017 9:20 am

dont know how to get photos up,
have pm you but heard nothing.

Willybland
Newbie
Posts: 21
Joined: Sun Jan 01, 2017 12:24 pm

Re: Carbon wheels / fitment

Post by Willybland » Tue Sep 19, 2017 10:19 pm

Hi sorry only just looked , just on hols but will get back to you wen I get home thank u :-)

atcsatcs
Newbie
Posts: 24
Joined: Fri Sep 08, 2017 7:40 am

Post by atcsatcs » Wed Sep 20, 2017 5:23 am

Nhận làm dịch vụ kế toán thuế, đại lý thuế 100% english hoặc song ngữ Vietnamese/ English cho các đơn vị nước ngoài, các dịch vụ nhận thực hiện:



Nhận làm dịch vụ Đại lý thuế: kê khai thuế, quyết toán thuế, hoàn thuế GTGT

Nhận làm dịch vụ Kế toán - Thuế trọn gói Hà Nội Bắc Ninh Bắc Giang



Image



Tất cả các dữ liệu nghiệp vụ kế toán, thuế đều thực hiện làm trên phần mềm kế toán, làm đến đâu bàn giao và cập nhật dữ liệu đến đấy để đơn vị có thể kiểm tra tình hình thực tế và phối hợp cùng giải quyết các vấn đề trong quá trình thực hiện.



Chi phí thỏa thuận tùy theo khối lượng công việc thực hiện: 



1. Kê khai thuế TNCN GTGT TNDN tháng quý năm:



Hàng tháng, quý đầu mỗi kỳ sẽ có cán bộ đến thực hiện các công việc: Khai nộp thuế môn bài hàng năm, Lập báo cáo thuế GTGT, tạm tính TNDN hàng tháng, quý gửi cơ quan thuế, Lập báo cáo quyết toán thuế TNDN, TNCN năm, Lập báo cáo quyết toán các loại thuế liên quan khác, Lập báo cáo tài chính, Thông báo cho doanh nghiệp số tiên thuế phải nộp khi có phát sinh. 



2. Các nghiệp vụ kế toán



Phân loại, sắp xếp, đóng chứng từ kế toán, định khoản theo dõi các nghiệp vụ kế toán phát sinh. Kiểm tra các hóa đơn chứng từ đầu vào, đầu ra cho phù hợp với quy định của pháp luật, Hạch toán và ghi sổ sách các chứng từ, Lập và in các loại sổ sách kế toán theo qui định. 



3. Tư vấn, giải trình thuế



Hỗ trợ tư vấn về lao động, bảo hiểm xã hội, bảo hiểm y tế, Tư vấn kế toán, thuế và hóa đơn chứng từ cho doanh nghiệp trong nội dung và phạm vi công việc thực hiện, trực tiếp làm việc giải trình hồ sơ số liệu với cơ quan thuế, kiểm toán trong phạm vi công việc đã thực hiện.



Liên hệ:



CÔNG TY TNHH MTV KẾ TOÁN – ĐẠI LÝ THUẾ ATCS VIỆT NAM

Hotline + Zalo: 0947 566 951 – Mr Tiến

Skype: ketoanthueatcs@gmail.com

Email: ketoanthueatcs@gmail.com

Web: ketoanthueATCS.vn



Nhận Dịch vụ Kế toán Thuế trọn gói Hà Nội Bắc Ninh Bắc Giang

Thực hiện dịch vụ kế toán - Thuế 100% bằng english hoặc song ngữ Việt-Anh cho các đơn vị nước ngoài

Cung cấp hỗ trợ triển khai phần mềm kế toán

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests