Wheel bearings.....

Wheels, shocks, forks, frame
Post Reply
Marty_Rillo
Heavy Smoker
Posts: 199
Joined: Wed Dec 16, 2009 9:41 pm
Location: Shetland

Wheel bearings.....

Post by Marty_Rillo »

Now then guys, I ordered bearings from the bay, they are the wrong size.
Pretty hacked off but buy cheap, pay double, or more....
Where did you lot get them from? And did they come with the dust seals?
Cheers Martin.
SP_BOTT
Oil Injector
Posts: 706
Joined: Sun Sep 30, 2007 5:59 pm

Re: Wheel bearings.....

Post by SP_BOTT »

beleive you want 6203 2RS, it's the same for both wheels, apart from the sprocket carrier. the 2RS will give you the Rubber Seals you want.

Try these
http://simplybearings.co.uk/shop/advanc ... 1a&x=0&y=0
Marty_Rillo
Heavy Smoker
Posts: 199
Joined: Wed Dec 16, 2009 9:41 pm
Location: Shetland

Re: Wheel bearings.....

Post by Marty_Rillo »

Thank you very much.
It's a minefield the ebay, too many halfwits in the world.
This kr is turning into perhaps too much of a restoration. Haha!
Cheers!
headcoats
Avgas Sniffer
Posts: 2120
Joined: Sat Jun 09, 2007 10:10 am
Location: Pig on the wall country

Re: Wheel bearings.....

Post by headcoats »

SKF brand is a good make :wink:

Put bearings in the freezer still wrapped for a few hours before you fit them :P
Can it yer old boiler
User avatar
500bernie
Avgas Sniffer
Posts: 3396
Joined: Mon Aug 02, 2010 10:22 am
Location: Teesside

Re: Wheel bearings.....

Post by 500bernie »

headcoats wrote:SKF brand is a good make :wink:

Put bearings in the freezer still wrapped for a few hours before you fit them :P
And heat the housing up with a hair drier, then they just drop in place :)
Firecracker Red and Grey C3 300
Post Reply