KR1S Shock Dimension Required for Nitron Build

Wheels, shocks, forks, frame
Post Reply
RickNC30
Newbie
Posts: 8
Joined: Sun Jul 31, 2016 10:47 am

KR1S Shock Dimension Required for Nitron Build

Post by RickNC30 » Sat Jul 22, 2017 9:51 am

Hello -

I am commissioning Nitron to add KR1/KR1S shocks to their catalogue - I have a KR1 shock to send as a pattern but need some information for the KR1S version.

1) Can I confirm that the KR1 and KR1S shocks have the same basic dimensions (length and end fittings) i.e. the two units are interchangeable.

2) Could somebody please measure the length of the remote reservoir connecting hose on a KR1S shock for me (a clear picture of a 1S shock would also be useful).

Reply here or email ricknc30@gmail.com

Thanks for your help...

Rick

User avatar
Garry
Premix Junkie
Posts: 1366
Joined: Tue Jul 25, 2006 8:01 pm
Location: E.Midlands

Re: KR1S Shock Dimension Required for Nitron Build

Post by Garry » Mon Jul 24, 2017 4:31 pm

Not sure if anyone has replied Rick

The shocks are interchangeable (Hagon list the same shock for both models for further confirmation)

I have measured one i have and visible hose is 435mm (as near as i can measure) between the end fittings
Smokings Good For You

RickNC30
Newbie
Posts: 8
Joined: Sun Jul 31, 2016 10:47 am

Re: KR1S Shock Dimension Required for Nitron Build

Post by RickNC30 » Mon Jul 24, 2017 11:56 pm

Thanks, Garry -

That`s the information I needed - I will be sending the stock shock off to Nitron tomorrow with a request to build both Sport (non reservoir) and Track (remote reservoir) versions.

I will put a further post on here when we have any progress.

Cheers,
Rick

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest