Has Anyone ...
-
- Avgas Sniffer
- Posts: 2120
- Joined: Sat Jun 09, 2007 10:10 am
- Location: Pig on the wall country
Has Anyone ...
Fitted RGV running gear and then fitted the KR1S wheels back in ?
Can it yer old boiler
- smithyrc30
- Heavy Smoker
- Posts: 287
- Joined: Thu Oct 26, 2006 11:49 am
- Location: Torquay, Victoria, Australia
Shouldn't be too hard, you would need new bearings because the RGV uses 20mm spindles and the KR 17mm, but the ere are bearings with the same OD and thickness but with the different inner diameter.
I have a complete RGV VJ23 front end in mine (mounted in ZXR400 yokes, KR stem) and the matching rear wheel using the KR rear spindle.
Works well.
I have a complete RGV VJ23 front end in mine (mounted in ZXR400 yokes, KR stem) and the matching rear wheel using the KR rear spindle.
Works well.