KR1S CALIPER PISTONS ,WHAT CAN YOU USE TO REBUILD THE CRUMBLING RED OR BLACK STUFF IN END

Braking issues
Post Reply
bsa70
Light Smoker
Posts: 37
Joined: Sat Sep 28, 2013 1:17 pm
Location: hastings

KR1S CALIPER PISTONS ,WHAT CAN YOU USE TO REBUILD THE CRUMBLING RED OR BLACK STUFF IN END

Post by bsa70 » Mon Sep 11, 2017 8:17 pm

KR1S CALIPER PISTONS ,WHAT CAN YOU USE TO REBUILD THE CRUMBLING RED OR BLACK STUFF IN END ,THAT WITH STANDS HEAT AND PRESSURE WOULD FIBREGLASS PASTE DO ? ANY IDEAS LADS CHEERS, 8) :idea:
Top
bsa70
Light Smoker
Posts: 37
Joined: Sat Sep 28, 2013 1:17 pm
Location: hastings

Re: KR1S CALIPER PISTONS ,WHAT CAN YOU USE TO REBUILD THE CRUMBLING RED OR BLACK STUFF IN END

Post by bsa70 » Tue Nov 07, 2017 5:31 pm

i think jb weld high temp and psi strength might do,if any one tries it, let me know the outcome thanks.
Top
headcoats
Avgas Sniffer
Posts: 2079
Joined: Sat Jun 09, 2007 10:10 am
Location: Pig on the wall country

Re: KR1S CALIPER PISTONS ,WHAT CAN YOU USE TO REBUILD THE CRUMBLING RED OR BLACK STUFF IN END

Post by headcoats » Fri Nov 10, 2017 10:15 pm

A lot of brakes don't have anything in the end at all
Can it yer old boiler
Top
Post Reply

Return to “Brakes”