Made this for the KR, What have you made?

The place to talk about your Tandem!
Post Reply
TurboStew
Light Smoker
Posts: 45
Joined: Sat Jan 10, 2015 2:06 pm
Location: Melbourne Au

Made this for the KR, What have you made?

Post by TurboStew »

Hi all, when I got my KR the Fairing cover was lost that covers the hole to inspect the cooling system. I used a laser cutter to make a new cover out of acrylic. came up pretty good I think.

Cheers Stew
You do not have the required permissions to view the files attached to this post.
(2x) GPZ 750 Turbo, E1 1984 & E2 1985
KDX 175 B2
1997 GSXR 750 SRAD Blue/White
1984 KR 250 A Tandem Twin, Green
1985 KR 250 A2 Tandem Twin, Red
fuad

Re: Made this for the KR, What have you made?

Post by fuad »

=D> =D> =D> =D>
TurboStew
Light Smoker
Posts: 45
Joined: Sat Jan 10, 2015 2:06 pm
Location: Melbourne Au

Re: Made this for the KR, What have you made?

Post by TurboStew »

I put up this post hoping to inspire others to share their talent for innovation of repair. Come on guys surly you have some talent to enlighten us all with and some fantastic :idea: on how to bring back the life in the old KR.

:(
(2x) GPZ 750 Turbo, E1 1984 & E2 1985
KDX 175 B2
1997 GSXR 750 SRAD Blue/White
1984 KR 250 A Tandem Twin, Green
1985 KR 250 A2 Tandem Twin, Red
StrokerBoy
Premix Junkie
Posts: 1087
Joined: Thu Jul 27, 2006 9:43 am
Location: Yorkshire
Contact:

Re: Made this for the KR, What have you made?

Post by StrokerBoy »

Go on then, since you asked nicely. :)

Here's the hand-made wooden bottom-yoke bearing on my KR250 special...

Image

Don't worry, it's not staying like that - it's so I can push it around the garage in one piece. :mrgreen:
Kawasaki KR250 Tandem Twin (x4) & KS-II 80,
Yamaha RD350LC,
Suzuki GSX-R750RK & RB50 Gag.
User avatar
Top-shaggy
Premix Junkie
Posts: 1966
Joined: Mon Oct 31, 2011 11:09 pm
Location: Derbyshire

Re: Made this for the KR, What have you made?

Post by Top-shaggy »

=D> =D> =D>
If it takes more than 2strokes then your just playing at it..
TurboStew
Light Smoker
Posts: 45
Joined: Sat Jan 10, 2015 2:06 pm
Location: Melbourne Au

Re: Made this for the KR, What have you made?

Post by TurboStew »

That's it, that will do for what you intend to use it for StrokerBoy. Nice lathe work.
keep them coming Guys. It could get very interesting.
(2x) GPZ 750 Turbo, E1 1984 & E2 1985
KDX 175 B2
1997 GSXR 750 SRAD Blue/White
1984 KR 250 A Tandem Twin, Green
1985 KR 250 A2 Tandem Twin, Red
Post Reply