Kr250A2

The place to talk about your Tandem!
Post Reply
dougindoors
Heavy Smoker
Posts: 364
Joined: Wed Jun 03, 2009 9:12 pm
Location: rochester kent

Kr250A2

Post by dougindoors »

does any one know if the A2 engine still has the crankshaft support bearings on the RH side? I know the dampers are held on with nuts does that mean no bearing?
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
Skyeport
Light Smoker
Posts: 39
Joined: Thu Sep 12, 2013 11:07 pm

Re: Kr250A2

Post by Skyeport »

Yes they do.
The numbers on the bearing are 6 3 0 1 C 4
StrokerBoy
Premix Junkie
Posts: 1087
Joined: Thu Jul 27, 2006 9:43 am
Location: Yorkshire
Contact:

Re: Kr250A2

Post by StrokerBoy »

Here's the relevant parts-book pages for the A and A2. :)
Kawasaki KR250 Tandem Twin (x4) & KS-II 80,
Yamaha RD350LC,
Suzuki GSX-R750RK & RB50 Gag.
dougindoors
Heavy Smoker
Posts: 364
Joined: Wed Jun 03, 2009 9:12 pm
Location: rochester kent

Re: Kr250A2

Post by dougindoors »

Thanks Tim I did look at it but it does not really show the end of the crank, if any one has photos of the A2 crank damper end, just intrested to see how easily the A crank could be modded
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
Post Reply