Page 1 of 1

Exhaust drain

Posted: Fri Jul 01, 2016 5:56 pm
by saeid
In order to prohibit the bike spitting oil from exhaust, I removed the lower forward securing bolt of covers, replaced it with a hollow stud + lock nut connected to a rubber hose as per photos. Stud should not be inserted deep inside, few threads only to hold itself.

I'm using this arrangement for 2 months, no spitting and dirty oil is draining nicely down the hoses. No major modification.

Image

Image

And here is the latest photo I took from my KR. :D

Image

Re: Exhaust drain

Posted: Fri Jul 01, 2016 6:40 pm
by Binetta Steve
Nice modification, it should also allow any water to drain out since the water will be below the oil. Must improve the corrosion resistance of the cans.

Re: Exhaust drain

Posted: Fri Jul 01, 2016 7:45 pm
by podman
Nice mod mate, cant be many KRs in Iran ?!

Re: Exhaust drain

Posted: Fri Jul 01, 2016 11:13 pm
by Top-shaggy
Looks nicely modded in black. Liking that :)

Re: Exhaust drain

Posted: Sat Jul 02, 2016 6:46 pm
by dougindoors
Bikes looking good and a nice tip

Re: Exhaust drain

Posted: Thu Oct 27, 2016 9:37 am
by saeid
podman wrote:Nice mod mate, cant be many KRs in Iran ?!
Not sure, haven't seen one as I remember.
This one is not registered and I'm riding it illegally!
Since it is 2 stroke and over 10 years of age.