Page 1 of 1

need clutch springs ,92081-1821 and plates

Posted: Mon Mar 06, 2017 10:58 pm
by pepsi
Found the plates, but the springs are hard to find ,found these, but they are gonna cost a lot :shock: , are there any other springs I could use?


http://www.ebay.com/itm/232195589212?_t ... EBIDX%3AIT

Re: need clutch springs ,92081-1821 and plates

Posted: Mon Mar 06, 2017 11:15 pm
by Gerrit
Found this, there may be other suppiers:

http://www.ebay.co.uk/itm/KAWASAKI-KR-2 ... Sw3mpXGkNT

Re: need clutch springs ,92081-1821 and plates

Posted: Tue Mar 07, 2017 12:55 am
by JanBros
a spring is what it is : just a spring.
any spring with the correct length and diameter can do the job, there is only one type of ordinary "spring-steel". it's strength is solely determined by the thickness f the metal, the number of windings and the diameter of the entire spring. so just look for any springs that correspond or deviate not too much (and to be on the safe side, deviate tougher).

less windings (for the same total length) , thicker metal or smaller diameter stiffen the spring.

Re: need clutch springs ,92081-1821 and plates

Posted: Tue Mar 07, 2017 2:21 am
by pepsi
any spring with the correct length and diameter can do the job, ....
yep, I agree , the trouble is finding that spring, the listings do not give dimensions, and I don't have piles of new different springs to compare to the correct stock unworn length. I cannot find any clutch spring dimension charts either. :(

Re: need clutch springs ,92081-1821 and plates

Posted: Tue Mar 07, 2017 12:39 pm
by StrokerBoy
Loads of people advertising KR250A clutch springs on Ebay (UK), I've not tried any of them though.

Re: need clutch springs ,92081-1821 and plates

Posted: Tue Mar 07, 2017 3:38 pm
by pepsi
StrokerBoy wrote:Loads of people advertising KR250A clutch springs on Ebay (UK), I've not tried any of them though.
most don't ship to the USA :| I am going to try to get some EBC springs here but I gotta figure out why there are two numbers for apparently the same spring, CSK010 and CSK10, as I can only find the CSK10 ones sold over here. FYI,it seems that KR1S's use the same springs.

Re: need clutch springs ,92081-1821 and plates

Posted: Tue Mar 07, 2017 5:39 pm
by pepsi
I called EBC and they said the two numbers are the same springs so I ordered the ones available over here CSK10. :D I have a set of OEM plates and EBC springs coming =D>