Page 1 of 1

Need intake cover seals # 92055-1243, not 92055-1169

Posted: Wed Mar 22, 2017 4:47 pm
by pepsi
Need intake cover seals # 92055-1243, I found these. I goofed big time with the first request as I had the wrong number.

http://page16.auctions.yahoo.co.jp/jp/a ... u137066301

Re: Need intake cover seals # 92055-1169

Posted: Wed Mar 22, 2017 10:03 pm
by pepsi
I suppose a simple O ring would work.

http://www.cmsnl.com/products/ring-o-1215mm_920551169/

Image

Re: Need intake cover seals # 92055-1169

Posted: Wed Mar 22, 2017 11:28 pm
by Gerrit
The disc valve covers were sealed by O-rings on the A1 and A7 so they will work on the KR250A as well. The originals are most probably O-rings anyway.

Re: Need intake cover seals, 92055-1243

Posted: Thu Mar 23, 2017 1:41 am
by pepsi
I quoted the wrong part number! :oops: the right one is 92055-1243,they are a rubber molded part, please see the attached .
Image

Re: Need intake cover seals # 92055-1243, not 92055-1169

Posted: Thu Mar 23, 2017 11:31 am
by Gerrit
There's a complete gasket kit on evilBay which includes those seals:

http://www.ebay.com/itm/KAWASAKI-KR250A ... 6w&vxp=mtr

Re: Need intake cover seals # 92055-1243, not 92055-1169

Posted: Thu Mar 23, 2017 2:18 pm
by pepsi
Gerrit wrote: Thu Mar 23, 2017 11:31 am There's a complete gasket kit on evilBay which includes those seals:

http://www.ebay.com/itm/KAWASAKI-KR250A ... 6w&vxp=mtr
good job :mrgreen: , I did not, could not find those. :cry: , got them ordered

Re: Need intake cover seals # 92055-1243, not 92055-1169

Posted: Thu Mar 23, 2017 3:01 pm
by StrokerBoy
Yeah, I've got one of those aftermarket KR gasket sets, I've not used any of it yet but I am impressed by how many parts are included. Let us know how you get on with it.

Re: Need intake cover seals # 92055-1243, not 92055-1169

Posted: Thu Mar 23, 2017 3:35 pm
by pepsi
got a techy question about the crank pinion setup. :shock: I'll ask it in another thread.

Re: Need intake cover seals # 92055-1243, not 92055-1169

Posted: Tue Apr 04, 2017 4:13 am
by pepsi
StrokerBoy wrote: Thu Mar 23, 2017 3:01 pm Yeah, I've got one of those aftermarket KR gasket sets, I've not used any of it yet but I am impressed by how many parts are included. Let us know how you get on with it.
I got gaskets and seals I don't know what to do with :shock: :mrgreen:


Image