Anyone know if the Aussie KR250s had a compliance plate fitted in 1984? I have the Aussie longer rear fender on mine but not the Aussie spec. indicators.
How can I tell if I'm going to have dramas getting this thing registered?
Compliance Plate KR250A?
-
- Smoker
- Posts: 61
- Joined: Wed Jul 28, 2010 5:32 am
- Location: Canberra AUS
-
- Heavy Smoker
- Posts: 364
- Joined: Wed Jun 03, 2009 9:12 pm
- Location: rochester kent
compliance plate
hi I have a 1984 kr250a imported from aus it has a compliance plate fitted on the Lh side of the frame near the head stock with a number, make, model amd serial number stamped on it. I would let you have it but I will need it to get an ageing cert for registration.
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
-
- Heavy Smoker
- Posts: 193
- Joined: Mon Nov 09, 2009 4:29 am
- Location: Sydney Australia
-
- Heavy Smoker
- Posts: 364
- Joined: Wed Jun 03, 2009 9:12 pm
- Location: rochester kent
plate
hi had a look last night and yes your right the plate is on the right side not left, but it is stamped with the year 1984, so they must have fitted these been fitted prior to 85.
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
- pwatkins
- Newbie
- Posts: 11
- Joined: Sat Aug 21, 2010 8:16 pm
- Location: Melbourne, Australia