Page 15 of 16

Re: finally started

Posted: Sat Sep 03, 2016 7:36 pm
by dougindoors
Nearly there, on the paint side, ordered a pair off A2 cranks with Image

Re: finally started

Posted: Sat Sep 03, 2016 7:42 pm
by dougindoors
Image

Dry run still needs polishing

Re: finally started

Posted: Sat Sep 03, 2016 7:45 pm
by dougindoors
Image

Re: finally started

Posted: Wed Sep 07, 2016 10:15 pm
by dougindoors
A2 cranks and dampers ordered and paid for, now the 2 week wait from Aus, apparently they have been rebuilt with new rods, so at 450AUD - £268 including air freight a bargain. Now to finish polishing the nose fairing, take a few, well lots of photos, chuck the AR125 back together loosely, get it off the ramp, strip off all,the body work off the KR and remove its heart for the upgrade. Maybe on the road next summer lol.

Re: finally started

Posted: Thu Sep 08, 2016 11:29 pm
by Top-shaggy
dougindoors wrote:A2 cranks and dampers ordered and paid for, now the 2 week wait from Aus, apparently they have been rebuilt with new rods, so at 450AUD - £268 including air freight a bargain. Now to finish polishing the nose fairing, take a few, well lots of photos, chuck the AR125 back together loosely, get it off the ramp, strip off all,the body work off the KR and remove its heart for the upgrade. Maybe on the road next summer lol.
Great news Doug and agree sounds like a bargain :)

Re: finally started

Posted: Tue Sep 13, 2016 3:07 pm
by dougindoors
cranks arrived today from Australia!!! posted Friday PM :shock: . nearly finished flatting and polishing the fairing LH side done and assembled screen on just the other side to do, pics coming soon..........

Re: finally started

Posted: Sat Oct 01, 2016 6:58 pm
by dougindoors
The end of the 5 year thread? No still have to fit the A2 cranks, off with her clothes again and out with her heart. aImage Image_2009/media/DSCF6562_zpsmf5gdesg.jpg.html]Image[/URL]


Image
ImageImage
ImageImage

Re: finally started

Posted: Sun Oct 02, 2016 2:41 pm
by the KR kid
KR's looking great Doug! :D

Is that an Oz spec rear mudguard, with the holes for the indicators?

Re: finally started

Posted: Sun Oct 02, 2016 10:00 pm
by dougindoors
Yes it's a cut down one , I have the full length artical but it looks nasty, I need to hole saw some plastic to fill them in, maybe I'll get round to doing it when I pull the engine to fit the A2 cranks, well that's for another year after I finish the AR125.

Re: finally started

Posted: Mon Oct 03, 2016 7:53 am
by 500bernie
dougindoors wrote:Yes it's a cut down one , I have the full length artical but it looks nasty, I need to hole saw some plastic to fill them in, maybe I'll get round to doing it when I pull the engine to fit the A2 cranks, well that's for another year after I finish the AR125.
Hi Doug,
Why not just fit a couple of "Blind Grommets", you could pick a couple up from most electrical wholesalers.
This is what they look like (I am not suggesting that you buy a bag of a hundred).
http://thegrommetcompany.com/blind-grommets

Cheers,
Bernie :)

Re: finally started

Posted: Thu Oct 13, 2016 9:28 pm
by pepsi
round reflectors?

Re: finally started

Posted: Fri Oct 21, 2016 2:46 pm
by dougindoors
now's there's an idea good one Pepsi.

Re: finally started

Posted: Fri Feb 24, 2017 8:29 pm
by dougindoors
Not much going on with the kr at the mo battery on charge,lol trying to finish the ar125 so I can get the KR back on the ramp to do the cranks, applied for the nova as no V5 waiting for a reply.

Re: finally started

Posted: Wed Mar 08, 2017 5:09 pm
by dougindoors
NOVA arrived today, one step nearer, MOT next for registration and a number plate at long last, then do the cranks. :D

Re: finally started

Posted: Wed Mar 08, 2017 6:26 pm
by pepsi
dougindoors wrote:looks like I have bought some A2 cranks with dampers, the ouch is the cost inc freight £250.00, any way fairing is back, going to paint it tonight and lacquer on Friday, the final part of the body work =D> now I can get back to sorting the air leak and maybe upgrading the cranks. i'm just so glad I bought 2 gasket sets :lol:
Looks great =D> How did you decide you needed to replace the crankshafts?