kr250 fuel tap

The place to talk about your Tandem!
Post Reply
dougindoors
Heavy Smoker
Posts: 364
Joined: Wed Jun 03, 2009 9:12 pm
Location: rochester kent

kr250 fuel tap

Post by dougindoors »

hi any one got a spare fuel tap or the spring washer that goes between the plate and tap face ??/ cheers
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
dougindoors
Heavy Smoker
Posts: 364
Joined: Wed Jun 03, 2009 9:12 pm
Location: rochester kent

fuel tap again

Post by dougindoors »

ok then, does any one know if there are any alternative taps for the kr250. :?: the gpz500 or ex500 looks the same, but does anyone know if the mounting holes are the same hole centres. [-o<
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
User avatar
ScottaKR
Premix Junkie
Posts: 1521
Joined: Fri Aug 10, 2007 2:52 pm
Location: Australia

Post by ScottaKR »

Well the KR1/1S tap is almost identical, and most all parts from it are interchangable, so you could ask in the parts wanted for one from a KR1/1S. This also means that any tap that fits the KR1/1S will also fit (theoretically) the Tandem Twin, if that helps.
KR250 Tandem Twin (Naked) :mrgreen:
KR1 Red/White
KR1S Track Bike (has been put on hold for now)
ZXR750 H1 (Winter project)
dougindoors
Heavy Smoker
Posts: 364
Joined: Wed Jun 03, 2009 9:12 pm
Location: rochester kent

tap

Post by dougindoors »

cheers scott rgds doug
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
250 drummie
Heavy Smoker
Posts: 193
Joined: Mon Nov 09, 2009 4:29 am
Location: Sydney Australia

Post by 250 drummie »

I was missing the tap for mine as well. I went down to the wreckers with the tank and got one to do the job. dont know what it is off it might even be a KR tap but it does the job.
dougindoors
Heavy Smoker
Posts: 364
Joined: Wed Jun 03, 2009 9:12 pm
Location: rochester kent

fuel tap

Post by dougindoors »

just for the record the kawasaki ex500 and gpz 500 taps fit kr250's you just need to drill out for the 2nd outlet, 2nd hand and in good condition £10 =D>
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
Post Reply