Page 2 of 2
Posted: Fri Apr 26, 2013 6:21 pm
by Luders
I'm afraid it's a full engine strip then
Posted: Sat Apr 27, 2013 10:58 am
by jarno
wol post some pictures when i start the rebuilt.
Re: running on 1 cilinder
Posted: Tue Jul 02, 2013 8:07 pm
by gazoll
I don't think its running on both cylinders, it just back fires a lot whe I rev it up, but only from the left cylinder.. I dont no where the air fuel mixture screw is.. but when I did a compression test it said I only have about 60 psi in the left cylinder.
2013 MERCEDES BENZ SL-CLASS
Re: running on 1 cilinder
Posted: Wed Jul 03, 2013 9:18 pm
by dave32
Thats too low, (60psi),it should be between at least 90 on a stock compression engine,are you doing the test on a Wide Open Throttle on a warm engine,and whats the other cylinder reading?
Have you just had the top end off and fitted new pistons or rings?