Does anyone know of anyone/anywhere that has the two pipes that come from the oil pump and go into the inlet rubbers? Cradeley kwak dont have them. I finally got mine running the weekend and once I had turned it off i noticed two stroke oil leaking from behind the plastic cover that covers the pump. When i removed the cover I found that the two pipes have sheared off on the eyelets where the banjos pass through.
Kwak part number is 92059-1963
Cheers Waza.
Oil pump pipe ends broken off!!!
-
- Light Smoker
- Posts: 39
- Joined: Sun Apr 19, 2015 9:33 pm
-
- Newbie
- Posts: 13
- Joined: Wed Dec 15, 2010 6:56 pm
- Location: Cambridgeshire
Re: Oil pump pipe ends broken off!!!
I Also need the size and a source to replace them as I've snapped one, in the same place.
- 500bernie
- Avgas Sniffer
- Posts: 3396
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: Oil pump pipe ends broken off!!!
Firecracker Red and Grey C3 300
-
- Light Smoker
- Posts: 39
- Joined: Sun Apr 19, 2015 9:33 pm
Re: Oil pump pipe ends broken off!!!
I ordered these, but they called me back to say that the
pipes are cracked.
pipes are cracked.
-
- Heavy Smoker
- Posts: 206
- Joined: Wed Mar 24, 2010 7:29 pm
- Location: skegness
Re: Oil pump pipe ends broken off!!!
I think I may have some of these pipes, will try and have a look today at the workshop if I get time.
-
- Heavy Smoker
- Posts: 206
- Joined: Wed Mar 24, 2010 7:29 pm
- Location: skegness
-
- Light Smoker
- Posts: 39
- Joined: Sun Apr 19, 2015 9:33 pm
Re: Oil pump pipe ends broken off!!!
Hi Mark, I think I have sorted it now witha couple of hydraulic banjos and fittings and connected them with vacume pipe. I still have a problem with the revs hanging at about 2k. How much do you
want for them and where are you?
You wouldnt also have a spare throttle cable would you or know wher i could get one made up?
want for them and where are you?
You wouldnt also have a spare throttle cable would you or know wher i could get one made up?
- James P
- Oil Injector
- Posts: 582
- Joined: Mon Mar 11, 2013 10:47 am
- Location: Sydney, Australia
Re: Oil pump pipe ends broken off!!!
Venhill will make you one, or sell you the bits so you can make it yourself. You may also find other firms which offer similar parts and/or service.waza1972 wrote:...You wouldnt also have a spare throttle cable would you or know wher i could get one made up?
Regards,
James