Page 1 of 1
Mitaka or Wossner pistons?
Posted: Wed Apr 06, 2016 3:31 pm
by smoovly
One is twice the price of the other, I need a pair before I send my barrels off and have Mitaka in my 350 YPVS and they are ok so far. I've heard the quality concerns with the cheaper ones but is that a thing of the past?
I am looking at the PJME website, that's all they stock unless there's a third option?
Thanks
Re: Mitaka or Wossner pistons?
Posted: Wed Apr 06, 2016 3:38 pm
by mellorp
Re: Mitaka or Wossner pistons?
Posted: Wed Apr 06, 2016 6:11 pm
by smoovly
Thanks, Wossner it is then!
Re: Mitaka or Wossner pistons?
Posted: Wed Apr 06, 2016 10:32 pm
by JanBros
smoovly wrote:Thanks, Wossner it is then!
before you order them, reed this :
viewtopic.php?f=19&t=12388&hilit=Mitaka ... ing+defect
Re: Mitaka or Wossner pistons?
Posted: Wed Apr 06, 2016 11:46 pm
by Top-shaggy
Re: Mitaka or Wossner pistons?
Posted: Thu Apr 07, 2016 12:24 am
by JanBros
Re: Mitaka or Wossner pistons?
Posted: Thu Apr 07, 2016 12:46 am
by James P
Shaun, I think that piston has been incorrectly listed. Research elsewhere suggests that the 7022M07100 code applies to a 71mm piston for the Z900/1000.
Wasn't Jarno the one planning to place a special order with Wiseco to make pistons for the KR-1/1S...?
Regards,
James
Re: Mitaka or Wossner pistons?
Posted: Thu Apr 07, 2016 7:41 am
by Top-shaggy
James P wrote:
Shaun, I think that piston has been incorrectly listed. Research elsewhere suggests that the 7022M07100 code applies to a 71mm piston for the Z900/1000.
Wasn't Jarno the one planning to place a special order with Wiseco to make pistons for the KR-1/1S...?
Regards,
James
Thanks James
I did no more than pick up the ebay link.. doh
Wouldn't have bought them myself without checking out with supplier
Same seller also has Mitaka and Wossner for sale so I would have called them.
Yes I wanted some pistons from Jarno when he last advertised ..but preferred two ring rather than single ring. Not sure he got enough potential orders to make them which was a shame.
TS
Re: Mitaka or Wossner pistons?
Posted: Thu Apr 07, 2016 9:24 am
by jarno
Still trying to make a back double ring but just be came a father again so i do not have the time yet
Cheers JARNO,
Re: Mitaka or Wossner pistons?
Posted: Thu Apr 07, 2016 1:24 pm
by Top-shaggy
jarno wrote:Still trying to make a back double ring but just be came a father again so i do not have the time yet
Cheers JARNO,
Hey that's great news and far more important !!
CONGRATULATIONS =D>
Re: Mitaka or Wossner pistons?
Posted: Thu Apr 07, 2016 6:10 pm
by jarno
Thank you shaun.
Already got a kr1 for him when he turnes 18
Re: Mitaka or Wossner pistons?
Posted: Thu Apr 07, 2016 8:30 pm
by Top-shaggy
