1mm skimmed head, squish clearance

Twangled your powervalve grommit in your woodruff key? ask someone how to fix it here
Post Reply
User avatar
KR1 Man
Heavy Smoker
Posts: 480
Joined: Mon Jan 29, 2007 8:57 pm
Location: UK

1mm skimmed head, squish clearance

Post by KR1 Man » Wed Jun 14, 2017 1:29 pm

KR1 Man calling. I need some guidance please. I have a KR1-s head skimmed by 1mm with re worked combustion chambers. What would the squish clearance tolerances be if I combined this head with a pair of barrels of standard height? I have no experience of doing a squish clearence but have a friend with plenty who has kindly agreed to do it for me. I have a good selection of base gaskets of varying thicknesses, and plan to use a pair of mk2 mitaka pistons combined with a fully rebuilt crank from BDK. The cylinders have been professionally ported and I have re-worked the crankcases/inlets to the recent Stan Stephens article in Cmm. I plan to put this motor into my KR1, running std PWK28s' and Kr1-s pipes. Any advice please??? Best regards, KR1 Man.
KR1 Sleeping Beauty/Partner.Polished to perfection.
RD350 LC YPVS. Also grandson Declan's KR1 with ZXR black/purple paintjob/ KR1-s upgrades and max polishing

User avatar
JanBros
Premix Junkie
Posts: 2916
Joined: Wed Jul 26, 2006 11:50 pm
Location: the land of Francorchamps
Contact:

Re: 1mm skimmed head, squish clearance

Post by JanBros » Wed Jun 14, 2017 6:20 pm

only 1 reliable way of knowing : measuring.

like here : viewtopic.php?f=8&t=13694&start=45
You know it's cold outside when you trip over dog shit instead of standing in it.

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests