Twangled your powervalve grommit in your woodruff key? ask someone how to fix it here
jarno
Oil Injector
Posts: 706 Joined: Sat Aug 08, 2009 9:29 pm
Location: the netherlands
Post
by jarno » Mon Apr 15, 2013 8:52 pm
cleaned my carbs today because the rhs was leaking
put them in the ultrason and checked everything(floothight etc)
the rhs is still leaking checked it and rebuild it about 7 times today but stil leaking.
what can it be?
banditbob
Heavy Smoker
Posts: 217 Joined: Sun Jun 17, 2012 9:09 pm
Location: perth scotland
Post
by banditbob » Mon Apr 15, 2013 9:01 pm
Hi Jarno check the float needle!!!
dave32
Heavy Smoker
Posts: 472 Joined: Sun Oct 24, 2010 10:15 pm
Post
by dave32 » Mon Apr 15, 2013 9:21 pm
Leaking from the over flow pipe as in flooding?
If so check float height and as said that the needle valve is working and not sticking.
dirk
Heavy Smoker
Posts: 342 Joined: Mon Jul 30, 2007 8:18 pm
Location: Germany
Post
by dirk » Mon Apr 15, 2013 10:36 pm
Hello Jarno
I know that ...
For me it was the seal of the float chamber
Greetings!
Dirk
KR-1S 1990
RG500 1987
RGV 250 1992
TZR250 (2MA) 1987
jarno
Oil Injector
Posts: 706 Joined: Sat Aug 08, 2009 9:29 pm
Location: the netherlands
Post
by jarno » Tue Apr 16, 2013 7:39 am
thanks guys
i did check the floatneedle and it looks ok to me.
wil check it again today.
it is leaking thrue the overflopipe.
Luders
Avgas Sniffer
Posts: 3926 Joined: Fri Jun 18, 2010 11:29 am
Location: Oxfordshire
Post
by Luders » Tue Apr 16, 2013 8:33 am
If it's coming from the overflow pipe check your float needle again.
I had this problem with them sticking and you could take them out and give them a clean, but would start pissing fuel out again after a while. I ended up replacing them and have not had this problem since.
jarno
Oil Injector
Posts: 706 Joined: Sat Aug 08, 2009 9:29 pm
Location: the netherlands
Post
by jarno » Tue Apr 16, 2013 10:46 am
thanks luders.
sorted problem is gone.
cleaned the fload needle again now it stopped
jarno