Page 1 of 2
First Run Out
Posted: Tue Jun 21, 2016 3:06 pm
by Garry
Had first proper ride on my KR1 today since i put it back on the road last August
Only 10 miles but it ran lovely and Nikkons sounded great
Re: First Run Out
Posted: Tue Jun 21, 2016 3:59 pm
by podman
Looks proper mean that, like it...
Re: First Run Out
Posted: Thu Jun 23, 2016 7:01 am
by Garry
Thanks - been waiting to fit a new rear tyre hence length of time between use.
Re: First Run Out
Posted: Thu Jun 23, 2016 4:50 pm
by podman
Garry wrote:Thanks - been waiting to fit a new rear tyre hence length of time between use.
10 months for a tyre is no excuse m'lad..
Re: First Run Out
Posted: Thu Jun 23, 2016 5:59 pm
by Garry
Got a KR1S as well which has been my main bike
Re: First Run Out
Posted: Thu Jun 23, 2016 6:35 pm
by Binetta Steve
Garry wrote:Got a KR1S as well which has been my main bike
Just a mere 300cc of pure Hicks tuned and ported power! Lets see that out as well Gary.
Steve
Re: First Run Out
Posted: Fri Jun 24, 2016 5:45 pm
by scooble
Binetta Steve wrote:
Just a mere 300cc of pure Hicks tuned and ported power! Lets see that out as well Gary.
Steve
Whose Hicks may I ask?
Re: First Run Out
Posted: Fri Jun 24, 2016 10:52 pm
by 500bernie
Hi Tricia,
He means Martin (Hicks), and I think he has confused his Gary's.
(Gary with the Ebony/Green KR1S 300 lives in the Luton area).
Cheers,
Bernie
Re: First Run Out
Posted: Sat Jun 25, 2016 6:26 pm
by Binetta Steve
Schoolboy error on my part, thanks Bernie.
Steve
Ps great video Bernie
Re: First Run Out
Posted: Wed Jul 13, 2016 2:13 am
by mavesyn
Stunning looking bike.....
Re: First Run Out
Posted: Wed Jul 20, 2016 9:48 am
by Garry
Thanks
Went out on my S yesterday - seemed a good idea at the time but it was too hot and humid to really enjoy it
Was glad to get back home and back to shorts and t-shirt
Re: First Run Out
Posted: Thu Jul 21, 2016 12:38 pm
by 500bernie
A guy passed me on the A50 yesterday on a Ducati doing 90+ in tee shirt, shorts and trainers (no gloves either)
Re: First Run Out
Posted: Sat Nov 05, 2016 4:55 pm
by R1andy
Really love this colour scheme , looks fantastic
Re: First Run Out
Posted: Sat Nov 05, 2016 6:53 pm
by 500bernie
Hi Gary,
Great looking bikes.
Why is the right hand side panel short?
Cheers
Bernie
Re: First Run Out
Posted: Mon Nov 07, 2016 1:32 pm
by Garry
Thanks Andy/Bernie - my bikes aren't up to your standards - but i'm happy
Regarding the KR1 side panels - they were cracked at the front so trimmed them back - i think i actually prefer them. Have a couple of good ones now for spare.
The KR1S panels were like that when i bought the bike. The seat unit had also been trimmed along the bottom and the bottom frame rails cut from rear sub frame
. I think whoever did it wanted to improve the overall lines of the bike. Again i like it but probably not to everyones taste
I bought KR1Lee's projects last month (thanks Lee)
Have made a bit of a start - got the cracked engine mount welded on the S frame and taken the top end off the
seized KR1 engine. The top end seems okay - the crank is seized on the LH side (looks like water damage/rust).
Will start a seperate thread on this soon
Progress is slow as a bit too cold at the minute - tend to go out to the shed have a dig around, drink my cup of tea and come back in