Final KR Based Race Bike Project
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: Final KR Based Race Bike Project
Andy B and I just weighed the bike and have rounded up to 112kgs dry
-
- Newbie
- Posts: 22
- Joined: Wed Jun 24, 2009 10:40 am
- Location: Staffordshire
Re: Final KR Based Race Bike Project
Your doing a great job, really enjoying yours post's.
- Top-shaggy
- Premix Junkie
- Posts: 1966
- Joined: Mon Oct 31, 2011 11:09 pm
- Location: Derbyshire
Re: Final KR Based Race Bike Project
Looking fantastic in pictures Ben .. Hopefully see it in the flesh too very soon
(Oh and I've just noticed you have broke the 3000 posts mark! )
(Oh and I've just noticed you have broke the 3000 posts mark! )
If it takes more than 2strokes then your just playing at it..
-
- Premix Junkie
- Posts: 1231
- Joined: Tue Nov 13, 2007 8:52 pm
- Location: Yorkshire
- Contact:
Re: Final KR Based Race Bike Project
That's pretty light that is =D> .
All good stuff Luders
All good stuff Luders
I used to be so care less,as if i could'nt careless.
- 500bernie
- Avgas Sniffer
- Posts: 3396
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
-
- Premix Junkie
- Posts: 1587
- Joined: Wed May 16, 2007 2:24 am
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: Final KR Based Race Bike Project
Got one already, just not had time to finish all my instruments
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: Final KR Based Race Bike Project
Managed to get a little more fabrication work done today. Next steps is completing the header and exit cone to the stinger section. This will need to be done on the bike to ensure it's even and nothing fouls.
- 500bernie
- Avgas Sniffer
- Posts: 3396
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: Final KR Based Race Bike Project
My barrels have now had their machining work completed, with the KIPS bores done to accommodate the seals. Sending them of to Aptec tomorrow.
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: Final KR Based Race Bike Project
Been doing some tacking work today on my exhausts.
-
- Oil Injector
- Posts: 926
- Joined: Sat Mar 22, 2008 5:42 pm
- Location: retford n,nott`s working in cotswolds
- Contact:
Re: Final KR Based Race Bike Project
how is it ?
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: Final KR Based Race Bike Project
All good so far, I just want to change the angle slightly of the stinger, but happy so far with what we have done here.
-
- Oil Injector
- Posts: 926
- Joined: Sat Mar 22, 2008 5:42 pm
- Location: retford n,nott`s working in cotswolds
- Contact:
Re: Final KR Based Race Bike Project
i saw that before you said ,maybe 2 slight bends but you know what you doing ,this is fantastic news =D> and clearance with the rad