Page 39 of 44

Re: At Last......Putting it back together

Posted: Fri Mar 06, 2015 9:28 pm
by Binetta Steve
pauliboy wrote:That's a mint looking bike !!!
Hi, if you want to see what true grit determination New original spares and half a tonne of Solvol can do fo a bike have a look at the early pages. It kept me going all last year, pure class and meticulous attention to detail.
Steve

Re: At Last......Putting it back together

Posted: Tue Mar 10, 2015 12:48 am
by 500bernie
All sorted now, starts first kick, and sounds really mean :twisted:

Just need a warm day and a bit of sun so I can get out on it and perhaps do a mini video.

Cheers,
Bernie :)

Re: At Last......Putting it back together

Posted: Wed Mar 18, 2015 10:31 pm
by 500bernie
Image

Re: At Last......Putting it back together

Posted: Wed Mar 18, 2015 10:57 pm
by philfingers
Awesome! sounds great!

Re: At Last......Putting it back together

Posted: Thu Mar 19, 2015 4:31 am
by KR-1R
how did we live without endoscopes :P
nice crisp, shiney, and sleek with no pillion
however I think it needs to be richer at zero throttle (air screw or pilot) or the throttle cable slackened...
too slow to drop from 3000 to idle

Re: At Last......Putting it back together

Posted: Thu Mar 19, 2015 6:23 am
by 500bernie
Hi Danny
I will check that out this weekend, airscrew is at 3/4 turns out.
Cheers
Bernie. :)

Re: At Last......Putting it back together

Posted: Sun Mar 29, 2015 9:49 am
by 500bernie
KR-1R wrote:how did we live without endoscopes :P
nice crisp, shiney, and sleek with no pillion
however I think it needs to be richer at zero throttle (air screw or pilot) or the throttle cable slackened...
too slow to drop from 3000 to idle
Throttle cable way too tight, I must have had a few Bushmills at the time :oops:

Re: At Last......Putting it back together

Posted: Mon May 04, 2015 8:48 pm
by 500bernie
Done a bit more.....

1/4 turn in on the airscrews ........ much better \:D/

Upgrade the elderly electrics, changed the stator to an Electrex World unit.....

Image

The standard one was working just fine, but it could be +25 years old
Image

Image

Just need to measure the cable length and crimp on the connectors,
Image

Image
I left the cable quite a bit long, as the cable is directed anti-clockwise on the Electrix World unit, so I wound the cable tightly around the mounting boss and secured it with the wire clip.

As I had a BDK lightened flywheel (180g lighter) it seemed appropriate to fit it.
Image
Image

Job done :)
Image

Thanks Martin =D>

Re: At Last......Putting it back together

Posted: Mon May 04, 2015 8:58 pm
by Luders
Ah wow, nice one Bernie

Re: At Last......Putting it back together

Posted: Mon May 04, 2015 9:42 pm
by Binetta Steve
Ive missed seeing those glistening crankcases !
Steve

Re: At Last......Putting it back together

Posted: Mon May 04, 2015 10:43 pm
by 500bernie
Thanks for the comments guys :)
Took her out for a run and she felt different, the pickup on the revs seems much quicker and cleaner.
Did a full circuit of my area, country lanes and motorway, she seemed very comfortable on both, that's more than could be said for me :oops:
My right hand felt like it was going to drop off (had to sit up a few times and leave the bars go, until the blood went back into my fingers), my knees and hips are well knackered now :oops: Should have just done the gardening, I would have ached less.
It's been quiet Ben, what have you been upto?
Cheers
Bernie :)

Re: At Last......Putting it back together

Posted: Tue May 05, 2015 7:48 am
by Luders
I've just been busy and have a lot on with the Derby Phoenix. I was at Snetterton this weekend representing the club. Got a quick shifter off Borut the other week and want to change my transmission to my new close ratio one hopefully this coming weekend. I need to get the bike back on the dyno as well to setup my ignition properly as well.

Re: At Last......Putting it back together

Posted: Tue May 05, 2015 8:00 am
by 500bernie
Hi Ben,
That sounds promising, are the powerjets working well?
Bernie :)

Re: At Last......Putting it back together

Posted: Tue May 05, 2015 8:50 am
by Luders
Generally the bike works very well, but the powerjets need a little bit more setup. I can do this out on the track, as they come in to use more on anything other than WOT.

Re: At Last......Putting it back together

Posted: Tue May 05, 2015 10:24 am
by jarno
looking great there Bernie now she's even faster i quess :wink: