Page 1 of 1
Alll but finished
Posted: Fri Feb 19, 2016 12:01 pm
by Llewe
Hi all,
My rebuild is nearly complete, apart from yellow number boards, and at some point in the coming weeks I will repaint the wheels to colour match the rest of the bike.
Thanks
Mark
Re: Alll but finished
Posted: Fri Feb 19, 2016 12:37 pm
by jarno
looking great =D>
Re: Alll but finished
Posted: Fri Feb 19, 2016 2:33 pm
by podman
Stunner...
Re: Alll but finished
Posted: Fri Feb 19, 2016 8:07 pm
by toby69
Looking good, looks like your plastics were in far worse condition than mine. Excellent work
Re: Alll but finished
Posted: Fri Feb 19, 2016 8:12 pm
by DougB
Nice looking bike, well done!
Re: Alll but finished
Posted: Sat Feb 20, 2016 1:46 am
by EYREY1
that is ver nice
are you putting number board on the back ?
it looks a bit bare
Re: Alll but finished
Posted: Sat Feb 20, 2016 12:10 pm
by Llewe
Hi Guys
Thank you all for your comments
Toby, you were right there was a lot of damage the bike had been dropped previously, but I did get it cheap.
Not the best of repairs
Glass fibre fairing, but it's good now
After market indicator, not as good as original
Welded from both sides
Then covered n a good layer of araldite at the back to provide rigidity
I'm happy with the result
Do not over tighten!
Takes time to get it right
Putting the blue decal on gave me the right lines for the rest of the paintwork
Ready for painting
Hi Eyrey
I will be putting the number boards on, I messed up first time and if I fail with the next attempt I will paint them on instead
Cheers guys
Mark.
Re: Alll but finished
Posted: Sun Feb 21, 2016 5:23 pm
by Marty_Rillo
The number boards are a pain in the arse.
They go on easier dry, but you need to be careful and let the vinyl stretch and follow the shape of the panel.
Next ones I'm painting on!!
Martin
Re: Alll but finished
Posted: Sun Feb 21, 2016 9:15 pm
by Llewe
Hi Martin
Thanks for the advice, one more go then paint if it goes pear shaped.
Mark
Now I'm noticing my title (Alll), need to wear my glasses!!
Re: Alll but finished
Posted: Sun Feb 21, 2016 10:04 pm
by Marty_Rillo
Patience is required!
Use your fingertips (ooh I say!) Not a plastic spreader, and a firm sponge and go millimeters at a time!
Its slow but it works!
Cheers Martin.
Re: Alll but finished
Posted: Tue Feb 23, 2016 9:50 pm
by Llewe
Had another go at the number board today, wasted my money and will now paint it on, On the plus side it flew through the MOT this afternoon with one advisory to tie up a loose cable.
Happy days, ready for the nice weather!
Mark
My hornet is still the best bike I have ever owned, but not as much fun as the KR1S, I was really surprised when those power valves opened and it went mental.
.
Re: Alll but finished
Posted: Sun Mar 06, 2016 11:24 am
by tescr500
Re: Alll but finished
Posted: Sun Mar 06, 2016 10:48 pm
by Llewe
Thanks Tescr,
The number boards are being sorted, but she's fully road legal now and waiting some nice weather. And the other half is now happy it's back in the garage and out of the conservatory !
Mark
Re: Alll but finished
Posted: Sun Mar 06, 2016 10:51 pm
by Top-shaggy
Looking gorgeous
Re: Alll but finished
Posted: Sun Mar 06, 2016 10:56 pm
by Llewe
Thanks Shaggy