C1 Rebuild

Show us that box of bits in your shed!
Ian_B
Heavy Smoker
Posts: 133
Joined: Sat Feb 14, 2009 4:26 am
Location: Australia

C1 Rebuild

Post by Ian_B »

Start of the rebuild for the C1. Only 3 months behind schedule and another bike arrives on Monday.

Image

Image

Image
Charles
Premix Junkie
Posts: 1804
Joined: Tue Jun 26, 2007 3:59 pm
Location: Fourques, France

Post by Charles »

Looks great =D>
User avatar
pablo
Premix Junkie
Posts: 1546
Joined: Fri Nov 14, 2008 9:37 pm
Location: Co Durham

Post by pablo »

Nice :) Trouble now is everything has to be to the same standard :roll:
Ian_B
Heavy Smoker
Posts: 133
Joined: Sat Feb 14, 2009 4:26 am
Location: Australia

Post by Ian_B »

Started to clean up the controls. They Seem to be coming back to life after removing 20 years' worth of grime.

Image

Image

Does anyone know if the indicator stalks are the standard length? They seem quite short.

Image
garye345
Premix Junkie
Posts: 1231
Joined: Tue Nov 13, 2007 8:52 pm
Location: Yorkshire
Contact:

Post by garye345 »

Is that a blue and black belly pan i can see in the photo?
Looking good 8) .
I used to be so care less,as if i could'nt careless.
User avatar
ScottaKR
Premix Junkie
Posts: 1521
Joined: Fri Aug 10, 2007 2:52 pm
Location: Australia

Post by ScottaKR »

That looks like it's coming up a real treat there Ian.
Am I right in thinking that yours is a factory Black/Blue bike? I only noticed cause of Gary's comment and the grey rims in the background, and if it is, youve got yourself a pretty rare varient.

Cheers, Scott.
KR250 Tandem Twin (Naked) :mrgreen:
KR1 Red/White
KR1S Track Bike (has been put on hold for now)
ZXR750 H1 (Winter project)
User avatar
pablo
Premix Junkie
Posts: 1546
Joined: Fri Nov 14, 2008 9:37 pm
Location: Co Durham

Post by pablo »

Ian the bike looks like its coming on great.In answer to your question about the inicators they look like ZXR indicators to me as they are way shorter than the kr1s jobbies,in fact the whole back end looks ZXR :-k
I will have a look in the garage I think I might have one lying around.
I fitted ZXR ones to ours they look a lot neater than the long KR1s ones
viewtopic.php?t=4066&postdays=0&postorder=asc&start=15

Keep it coming =D>
User avatar
ScottaKR
Premix Junkie
Posts: 1521
Joined: Fri Aug 10, 2007 2:52 pm
Location: Australia

Post by ScottaKR »

Well I don't know what length indicators the UK KR's had, but I just went out into the shed to have a look for myself. The 4 rear gaurds I found (that still had indicators attached) all had the exact same ones as are on Ian's bike, so I think it's pretty safe to assume that they are what was fitted from the factory for the Aus market.

Cheers, Scott.
KR250 Tandem Twin (Naked) :mrgreen:
KR1 Red/White
KR1S Track Bike (has been put on hold for now)
ZXR750 H1 (Winter project)
User avatar
pablo
Premix Junkie
Posts: 1546
Joined: Fri Nov 14, 2008 9:37 pm
Location: Co Durham

Post by pablo »

Your right Scott,I've just looked through a few photos and the Aus KRs have a much neater tail than the UK model.No bulky number plate light smaller indicator stalks.............miles nicer looking
User avatar
the KR kid
Heavy Smoker
Posts: 433
Joined: Thu May 03, 2007 9:55 am

Post by the KR kid »

pablo wrote:Your right Scott,I've just looked through a few photos and the Aus KRs have a much neater tail than the UK model.No bulky number plate light smaller indicator stalks.............miles nicer looking
Unlike what they fitted to the Oz spec Tandem Twins; what were they thinking?!! Something to do with size/width/ height laws? They had a longer rear mudguard as well.

The blue KR1-S's are indeed rare; anyone know how many were made, just out of interest?

Your C1 is coming along great. Keep up the good work. You've no right to have a workshop that clean and tidy!
Stop annoying me, I'm running out of space to hide the bodies!

GS750B
KH250B5
Ian_B
Heavy Smoker
Posts: 133
Joined: Sat Feb 14, 2009 4:26 am
Location: Australia

Post by Ian_B »

Thanks for all the positive comments, its getting there slowly. I got a large batch of M6 rubber well nuts if anyone wants some, they are the ones that insert into the frame under the electro-bracket on which the regulator sits.

You are right, it is a factory blue/black KR-1S. All of the bodywork is original and in reasonable condition for its age. It will ultimately need some attention but is okay for now.

Got some replacement clocks a while back and did the refurb last night.

Image

Got to resist the temptation of transfering attention to the H***a MC28 and get the KR-1S finished by February.
User avatar
rvt2002
Light Smoker
Posts: 27
Joined: Sun Nov 25, 2007 1:15 am
Location: Gurnee IL. USA

Post by rvt2002 »

2 stroke nuts :) Aside from the mc28 is that a rgv or rs 250(covered)?
User avatar
Howie
Avgas Sniffer
Posts: 2055
Joined: Mon Mar 16, 2009 9:33 pm
Location: East Yorkshire

Post by Howie »

Looking good Ian, very good =D>

Howie
garye345
Premix Junkie
Posts: 1231
Joined: Tue Nov 13, 2007 8:52 pm
Location: Yorkshire
Contact:

Post by garye345 »

Clock mounting bolts spoil it [-X
I have got more than enough original bolts for any future restoration,for that i would part with 2,only 2 mind.
Nice to see the 2 below the temp gauge are standard.
When you have the plastics"ultimately need some attention"is there any chance you could get a fair quantity of the blue paint?cause thats the colour i would like to do one in 8)
I used to be so care less,as if i could'nt careless.
Ian_B
Heavy Smoker
Posts: 133
Joined: Sat Feb 14, 2009 4:26 am
Location: Australia

Post by Ian_B »

The bike undercover is this one:

Image

It's a 1996 variant that I've owned from new.


My better half has reminded me that I'm very sad discussing the merits of original clock mounting hardware versus aftermarket stainless steel ones but I'll put some orignal ones in to compare.

Blue paint: I'll see what I can do about getting some more made up when it comes to it. Not sure if there would be any problems (other than costs) shipping it from Aus to the UK though.
Post Reply