iv`e been collecting stuff for years but finally got round to knocking up a hydraulic lift bench / frame jig table ,this time last year i was on one of them beds having a knackerd kidney took out as i did`nt want it ,touch wood all clear a year later ,hopefully this will make me clean my bikes and look after them and my knees and finish a few projects ,3 meters long adjustable from 450mm to 850mm high ,wishing everyone a Very Happy Christmas
Home made bike lift frame jig table
-
- Oil Injector
- Posts: 926
- Joined: Sat Mar 22, 2008 5:42 pm
- Location: retford n,nott`s working in cotswolds
- Contact:
-
- Heavy Smoker
- Posts: 407
- Joined: Sat Jun 27, 2015 10:51 am
Re: Home made bike lift frame jig table
Great work mate , looks a quality bit of kit and very useful,
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: Home made bike lift frame jig table
Hi Fred
Can them bed frames be modified to get the start point lower to the ground?
I always crap myself getting the bike up a ramp.
Cheers
Bernie
Can them bed frames be modified to get the start point lower to the ground?
I always crap myself getting the bike up a ramp.
Cheers
Bernie
Firecracker Red and Grey C3 300
-
- Oil Injector
- Posts: 926
- Joined: Sat Mar 22, 2008 5:42 pm
- Location: retford n,nott`s working in cotswolds
- Contact:
Re: Home made bike lift frame jig table
It would take a lot of work,450mm is lowest without work,I only used 5mm plate and 70x70mm box as it's a jig table I can fabricate off, otherwise I might of used plywood , I am welding outriggers on this for scaffold boards either side to widen it for abba stands and paddock stands,I know what you mean about the overbalacing ,
-
- Oil Injector
- Posts: 926
- Joined: Sat Mar 22, 2008 5:42 pm
- Location: retford n,nott`s working in cotswolds
- Contact:
- Garry
- Premix Junkie
- Posts: 1436
- Joined: Tue Jul 25, 2006 8:01 pm
- Location: E.Midlands
Re: Home made bike lift frame jig table
Looks to be a comprehensive workshop you have there Fred
Are you ever worried about the bike falling off
Are you ever worried about the bike falling off
Smokings Good For You
-
- Oil Injector
- Posts: 926
- Joined: Sat Mar 22, 2008 5:42 pm
- Location: retford n,nott`s working in cotswolds
- Contact:
Re: Home made bike lift frame jig table
I'm going to make one of those cam front wheel stands and a couple of straps ,