Zeeltronic PCDI-10VT - No spark!!!!?

Dodgy Kips motor? CDI? battery? diode? reg/rect? its all gobbledygook to me but some people understand it ask tham a question here
Post Reply
Woodsy
Smoker
Posts: 52
Joined: Wed Nov 09, 2011 9:39 am

Zeeltronic PCDI-10VT - No spark!!!!?

Post by Woodsy »

Evening Folks!

I’m in need of the collective’s wisdom about why my Zeeltronic PCDI-10VT isn’t giving me a spark. I get a nice tight blue spark with the stock CDI, but plugging in they Zeeltronic gets nothing! 🧐

Please, any help / suggestions greatly appreciated 👍

Cheers,

Al
KR-1R
Premix Junkie
Posts: 1587
Joined: Wed May 16, 2007 2:24 am

Re: Zeeltronic PCDI-10VT - No spark!!!!?

Post by KR-1R »

.
maccas wrote: Sun Oct 30, 2011 12:19 pm Problem sorted!

Wiring diagram had a slight error in it, black/white wire was connected to brown/white on kr loom and it wasnt supposed to be connected to anything.

Black/white is optional kill switch wire so was earthing spark straight to ground.

Pulled black/white wire out and went first kick.

Just need to commision it now, but no time today :-(

Must say exhaust note has a definitive crack to it now as lozza has always said, idles much better too!

Maccas

.
http://kr-1s.co.uk/forum/viewtopic.php? ... ilit=brown
.
.
Woodsy
Smoker
Posts: 52
Joined: Wed Nov 09, 2011 9:39 am

Re: Zeeltronic PCDI-10VT - No spark!!!!?

Post by Woodsy »

Thanks KR1R-I’d seen that thread, but it was related tot the -V, not the -VT, and they’ve got differing wiring diagrams hence my plea for help!
Post Reply