I've had a search about and can't find an answer to this question.
I've finally just ordered a Zeeltronic ignition for my KR-1 and was wondering if anyone knows which curve is selected when the map switch input is grounded? I'm still using the standard left-hand switchgear for the choke lever and horn button and am going to wire the High/Low switch to the map input on the ignition, mainly because I can.
Thanks in advance.
Zeeltronic map switch
-
- Heavy Smoker
- Posts: 144
- Joined: Sun Apr 07, 2019 6:26 pm
- Location: Not far from York
-
- Heavy Smoker
- Posts: 420
- Joined: Fri Sep 19, 2014 6:44 pm
- Location: South Manchester
Re: Zeeltronic map switch
It uses the other map !!!!!
-
- Heavy Smoker
- Posts: 144
- Joined: Sun Apr 07, 2019 6:26 pm
- Location: Not far from York
Re: Zeeltronic map switch
It does that, Phil, but I was trying to work out which is used when it's grounded. I think it's map 2 but I was looking for confirmation.
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: Zeeltronic map switch
Drop Borut an email, I thought it just flipped from Map 1 to Map 2 and visa versa every time you operated the switch (momentarily grounding the circuit).
Firecracker Red and Grey C3 300
-
- Heavy Smoker
- Posts: 144
- Joined: Sun Apr 07, 2019 6:26 pm
- Location: Not far from York
Re: Zeeltronic map switch
The problem there Bernie is that you'd never know which map you're using.
I was hoping to find the answer somewhere, although one if the KH sites inferred that ground the input switches to map 2. I'll drop him an email as you say just to make sure.
-
- Heavy Smoker
- Posts: 420
- Joined: Fri Sep 19, 2014 6:44 pm
- Location: South Manchester
Re: Zeeltronic map switch
Yes it's Map 2. No connection uses Map1. When you add the earth to the switch it uses Map 2 but only if you tell it there is a map switch attached, otherwise it will always default to Map 1 regardless of the switch being grounded
-
- Heavy Smoker
- Posts: 144
- Joined: Sun Apr 07, 2019 6:26 pm
- Location: Not far from York
Re: Zeeltronic map switch
Thanks Phil, you're 100% correct. I emailed Borut this morning and he has confirmed also.
At least it means that the cable I have on order will be the right colour (red/yellow from the switchgear).