How to dismantle ZXR 250 USD forks?

Steely · Post by **Steely** » Sun Mar 16, 2008 6:15 pm

Is it easy to take usd forks apart, i would like to get them re-cromed.

Any advice welcomed.

Thanks in advance,

Tony

kwackman12 · Post by **kwackman12** » Sun Mar 16, 2008 10:18 pm

Try this link Tony http://www.zxrworld.co.uk/zxr400/main.htm found it very helpful in the past
Gary

Steely · Post by **Steely** » Mon Mar 17, 2008 5:48 pm

Many thanks gary, just what i was looking for.

JanBros · Post by **JanBros** » Mon Mar 17, 2008 8:08 pm

or you can just buy these

:

http://cgi.benl.ebay.be/ws/eBayISAPI.dl ... :IT&ih=010

Red Devil 777 · Post by **Red Devil 777** » Mon Mar 17, 2008 8:29 pm

How did I know that Jan would have spotted them?

Nearly pm'ed you to point them out......

Steely · Post by **Steely** » Mon Mar 17, 2008 8:51 pm

Yes, saw them earlier, might put a bid on, come in handy as a second pair.

JanBros · Post by **JanBros** » Tue Mar 18, 2008 3:12 pm

is that your bid Steely ?

I was also watching them in case they would go cheap, but I don't really need them, so if it's you, I'll let you have them.

ZXR250's were never sold in Belgium, so there's no one after them

Steely · Post by **Steely** » Tue Mar 18, 2008 6:15 pm

Yes that is me, look like a good set, hope i get them.

JanBros · Post by **JanBros** » Wed Mar 19, 2008 12:48 am

Steely wrote:Yes that is me, look like a good set, hope i get them.

ok no prob

just keep your hands off his ZXR-discs, they are mine