The Hybrid
- corky
- Oil Injector
- Posts: 858
- Joined: Mon Jul 31, 2006 11:44 am
- Location: Widnes and the World...
The Hybrid
FOR SALE FOR SALE FOR SALE..........£1750
SEE ADVERT IN FOR SALE SECTION..
Kr1s frame powder coated black
Zxr400 front end,
forks fully rebuilt by K-tech using 20ssk kit and 85nm springs,
Dymag front wheel (zxr400),
2002 fireblade nissin calipers & sintered pads,
Goodridge cast iron discs
Gxsr1000 radial front brake master cylinder,
Rgv250 banana swing arm and 17"wheel conversion,
Ohlins rear shock, rebuilt by MCTechnics
R6 rearsets carbon fibre heel plates,
Brembo rear brake master cylinder,
Kr1s stan stephens stage 3 tuned engine,
30mm carbs with leda ram air kit,
Std rev counter- scitsu temp gauge,
Batt-pac system,
Race clip-ons,
Kwik action throttle (1/4 turn),
Fzr choke lever relocated,
clutch cover armour,
TCR crash bungs,
Dunlop a10 tyres,
lightwieght fairing frame,
Modified kwik release fuel tank with twin fuel outlets,
Nikkon pipes,
wrapped chambers,
Race loom,
Race radiator,
race prepared lockwired bolts,catch tank,etc etc
Just fitting zeeltronic ignition, 35mm carbs and ram air
SEE ADVERT IN FOR SALE SECTION..
Kr1s frame powder coated black
Zxr400 front end,
forks fully rebuilt by K-tech using 20ssk kit and 85nm springs,
Dymag front wheel (zxr400),
2002 fireblade nissin calipers & sintered pads,
Goodridge cast iron discs
Gxsr1000 radial front brake master cylinder,
Rgv250 banana swing arm and 17"wheel conversion,
Ohlins rear shock, rebuilt by MCTechnics
R6 rearsets carbon fibre heel plates,
Brembo rear brake master cylinder,
Kr1s stan stephens stage 3 tuned engine,
30mm carbs with leda ram air kit,
Std rev counter- scitsu temp gauge,
Batt-pac system,
Race clip-ons,
Kwik action throttle (1/4 turn),
Fzr choke lever relocated,
clutch cover armour,
TCR crash bungs,
Dunlop a10 tyres,
lightwieght fairing frame,
Modified kwik release fuel tank with twin fuel outlets,
Nikkon pipes,
wrapped chambers,
Race loom,
Race radiator,
race prepared lockwired bolts,catch tank,etc etc
Just fitting zeeltronic ignition, 35mm carbs and ram air
Last edited by corky on Sun Mar 15, 2009 1:38 am, edited 18 times in total.
kr1s project wanted
aprillia rs125 track bike
03 r6 race/trackbike
dr500 flat tracker project
plus a few more......x7,kdx125 etc
aprillia rs125 track bike
03 r6 race/trackbike
dr500 flat tracker project
plus a few more......x7,kdx125 etc
- SHimmer45
- Premix Junkie
- Posts: 1400
- Joined: Tue Jul 25, 2006 7:51 pm
- Location: SOuthampton Hants UK
- Contact:
- corky
- Oil Injector
- Posts: 858
- Joined: Mon Jul 31, 2006 11:44 am
- Location: Widnes and the World...
try here mate...
http://s60.photobucket.com/albums/h10/corky304/
http://s60.photobucket.com/albums/h10/corky304/
kr1s project wanted
aprillia rs125 track bike
03 r6 race/trackbike
dr500 flat tracker project
plus a few more......x7,kdx125 etc
aprillia rs125 track bike
03 r6 race/trackbike
dr500 flat tracker project
plus a few more......x7,kdx125 etc
- JanBros
- Avgas Sniffer
- Posts: 3306
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
- corky
- Oil Injector
- Posts: 858
- Joined: Mon Jul 31, 2006 11:44 am
- Location: Widnes and the World...
the coolant (running premix ) expansion tank was off my 1999 r6 that i totalled....just put there as an idea not using it now. the rearsets just required a small adapter bracket i will send you the details if you want and try to get a better picture...
kr1s project wanted
aprillia rs125 track bike
03 r6 race/trackbike
dr500 flat tracker project
plus a few more......x7,kdx125 etc
aprillia rs125 track bike
03 r6 race/trackbike
dr500 flat tracker project
plus a few more......x7,kdx125 etc
- corky
- Oil Injector
- Posts: 858
- Joined: Mon Jul 31, 2006 11:44 am
- Location: Widnes and the World...
a few more pics...its getting there now..
http://i60.photobucket.com/albums/h10/c ... C00158.jpg
http://i60.photobucket.com/albums/h10/c ... C00161.jpg
http://i60.photobucket.com/albums/h10/c ... C00158.jpg
http://i60.photobucket.com/albums/h10/c ... C00161.jpg
kr1s project wanted
aprillia rs125 track bike
03 r6 race/trackbike
dr500 flat tracker project
plus a few more......x7,kdx125 etc
aprillia rs125 track bike
03 r6 race/trackbike
dr500 flat tracker project
plus a few more......x7,kdx125 etc
- the-elf
- Avgas Sniffer
- Posts: 2800
- Joined: Wed Jul 26, 2006 2:48 pm
- Location: Rockingham, Western Australia
Can you put some more details on the r6 rearsets please. I'm hopping MJ gets some specials sorted, but if not then I'm gonna have to adapt something to fit. After trying J Hawkes bike his riding position is spot on. and his rearsets are actually 65mm further back and 25mm higher than standard. I'm aiming for something simular.
BTW the bike looks ace.
BTW the bike looks ace.
- corky
- Oil Injector
- Posts: 858
- Joined: Mon Jul 31, 2006 11:44 am
- Location: Widnes and the World...
I have just bought another set of ebay complete with master cylinder etc for my rg800 project, as their design makes them
ideal.
The top bolt mounts in the same point thru the adapter plate but the lower mounting point is mounted soley on the adapterplate
i will make another adapter plate up for the rg but will make them with adjustable mounting pionts(more holes), like race ones.
Just got the calipers back from the powder coaters but they look that nice i am going to swap them with the ones on my KR1s !!!!!
tank away getting sprayed white, as i am not going to spray up my grp fairings just stickers..gonna crash it at some stage....
Last edited by corky on Fri Nov 17, 2006 10:37 pm, edited 1 time in total.
kr1s project wanted
aprillia rs125 track bike
03 r6 race/trackbike
dr500 flat tracker project
plus a few more......x7,kdx125 etc
aprillia rs125 track bike
03 r6 race/trackbike
dr500 flat tracker project
plus a few more......x7,kdx125 etc
- corky
- Oil Injector
- Posts: 858
- Joined: Mon Jul 31, 2006 11:44 am
- Location: Widnes and the World...
- corky
- Oil Injector
- Posts: 858
- Joined: Mon Jul 31, 2006 11:44 am
- Location: Widnes and the World...
- corky
- Oil Injector
- Posts: 858
- Joined: Mon Jul 31, 2006 11:44 am
- Location: Widnes and the World...
the tail unit is a kr1s one off ebay..
get the carbon from a mate in work?!? and as it happens making a clock bracket for myself but just for a Rev counter and a digital temp gauge...what you after a full mounting for all three clocks?
get the carbon from a mate in work?!? and as it happens making a clock bracket for myself but just for a Rev counter and a digital temp gauge...what you after a full mounting for all three clocks?
Last edited by corky on Fri Nov 17, 2006 8:21 pm, edited 1 time in total.
kr1s project wanted
aprillia rs125 track bike
03 r6 race/trackbike
dr500 flat tracker project
plus a few more......x7,kdx125 etc
aprillia rs125 track bike
03 r6 race/trackbike
dr500 flat tracker project
plus a few more......x7,kdx125 etc