kr1s catch tanks.
-
- Newbie
- Posts: 9
- Joined: Wed May 27, 2009 9:01 pm
- Location: grimsby
kr1s catch tanks.
hi,everybody ,i am presentley building a kr1s track bike ,used to race years ago,in marlboro rounds with lc,s,did a bit with 4 strokes aswell sorry ,i have not got a current acu licence so don,t have aacu book for specs for supersport 400 racing,i have lockwired caliper bolts gearbox drain plug spindles etc and have fitted overflow pipe catch tanks ,but have been told you need a catchtank in bellypan in case motor goes to catch oil,is this correct?also do you make your own ?if so any ideas or can you buy them any help or if anybody got one for sale would be very interested in any help anyone can give me regards freemo.
get up it
-
- Premix Junkie
- Posts: 1193
- Joined: Tue Jul 25, 2006 8:51 pm
- Location: Southampton
- the-elf
- Avgas Sniffer
- Posts: 2800
- Joined: Wed Jul 26, 2006 2:48 pm
- Location: Rockingham, Western Australia
You don't need a oil catch tank in the fairing on a 2 stroke.
-- Lets go Racing
Sponsored by:
Paddockstand Ltd: Tyre and Bike spares http://www.paddockstand.co.uk
Sponsored by:
Paddockstand Ltd: Tyre and Bike spares http://www.paddockstand.co.uk
-
- Newbie
- Posts: 9
- Joined: Wed May 27, 2009 9:01 pm
- Location: grimsby
catch tank
thanks for help folks,not a dummy, but thought it a bit strange when i was initially told,one less job to do so thats good thanks once again freemo
get up it