spent all day in the garage today with the new toy....an aprillia rs125 track bike...
i know but it was very very cheap...
it has no spark... when making the ignition i get 12v into the cdi but then get 70v at the coil.....
this degrades slowly unless the starter is pressed and then rises sharply again..
what voltage is usually sent to the coil? (think its around 2-350v) and is it usually sent initially?
i have changed the regulater and cdi !!
pick up coil resistance is ok coil... is just outside limits but i have had worse results from coils that run ok...
will get another coil anyway...
bloody hate electrics...
anyone?
none kr but electrical...
- corky
- Oil Injector
- Posts: 858
- Joined: Mon Jul 31, 2006 11:44 am
- Location: Widnes and the World...
none kr but electrical...
kr1s project wanted
aprillia rs125 track bike
03 r6 race/trackbike
dr500 flat tracker project
plus a few more......x7,kdx125 etc
aprillia rs125 track bike
03 r6 race/trackbike
dr500 flat tracker project
plus a few more......x7,kdx125 etc