Well, thought i would update every on my progress so far. The engine is out now. Took the barrels off, and found there was a load of sludge in with the crank (a good 1/2 litre)! not sure what it is lol, i have draided the gear box oil so i dont think it came from the gear box any ideas chaps? also any1 know where i can get a full oil seal/gasket/top end re-build set from?
Cheers
New KR project, should i break or re-build??
-
- Premix Junkie
- Posts: 1804
- Joined: Tue Jun 26, 2007 3:59 pm
- Location: Fourques, France
http://www.pjme.co.uk/acatalog/copy_of_KR1S.htmlsweaving wrote:also any1 know where i can get a full oil seal/gasket/top end re-build set from?
cheers,
Charles
-
- Light Smoker
- Posts: 34
- Joined: Wed Jun 10, 2009 1:01 am
- Location: redditch
Its mine now
Hi guys yes as it says in the subject bar this kr is mine now and i have been hard at work over the week end, The bike is in bits now the swingarm was seezed in and all the shock linkage was the same and the shock is US as well.It took a day and a half two clean the crap off it .I dont no how people can let there bikes get in such a state when there life deepens on it . so it looks like iam in the kr gang now cheers guys =D>
-
- Premix Junkie
- Posts: 1154
- Joined: Tue Jul 25, 2006 4:59 pm
- Location: west midlands
-
- Light Smoker
- Posts: 34
- Joined: Wed Jun 10, 2009 1:01 am
- Location: redditch
this bike now
Hi guys i will be posting pictures of this bike soon the restoration is nearly finished its cost a small fortune to rebuild and all thats left is the body work witch dream machine will be doing as soon as i get some good panels + tank see what you think ?
cheers guys and thanks for the help off some of you with parts to bring my bike back to life.
cheers lewis =D>
cheers guys and thanks for the help off some of you with parts to bring my bike back to life.
cheers lewis =D>
kr1s C3 RG500CH / RG500G R1 SP.