My new project
-
- Newbie
- Posts: 13
- Joined: Sat Apr 03, 2010 8:50 pm
- Location: South Cheshire
My new project
Hi all,
Just picked up this KR1s C2 to do as a project over the summer. Some non standard parts and no original fasteners but basically a solid bike.
I also have an RGV and am an active member of the rgv250 forum.
Any advice appreciated.
Rob
Just picked up this KR1s C2 to do as a project over the summer. Some non standard parts and no original fasteners but basically a solid bike.
I also have an RGV and am an active member of the rgv250 forum.
Any advice appreciated.
Rob
- Howie
- Avgas Sniffer
- Posts: 2055
- Joined: Mon Mar 16, 2009 9:33 pm
- Location: East Yorkshire
-
- Heavy Smoker
- Posts: 320
- Joined: Sat Mar 01, 2008 5:49 pm
-
- Heavy Smoker
- Posts: 129
- Joined: Fri Aug 21, 2009 8:50 pm
- Location: Inverness
-
- Oil Injector
- Posts: 605
- Joined: Tue Aug 08, 2006 7:07 pm
- Location: Cheshire
yeah i built that one front end is zxr400 rear wheel is rgv nikon pipes and lomas end cans, should also have ram pipes cant remember what breed though.
I think there are pics in this section somewhere
I think there are pics in this section somewhere
I wish i knew something about KR's so i was like knowledgeable about them and everything like what you lot are
-
- Newbie
- Posts: 13
- Joined: Sat Apr 03, 2010 8:50 pm
- Location: South Cheshire
Thanks for the info John,john-b wrote:yeah i built that one front end is zxr400 rear wheel is rgv nikon pipes and lomas end cans, should also have ram pipes cant remember what breed though.
I think there are pics in this section somewhere
Ram air pipes are still on there. It still runs well. I need to rebuild the forks as one of the seals has gone and also tidy up some of the wiring as there is a big bunch of spade connectors sitting under the instruments. After that I'll get it on the road and plan to strip and clean over the winter. (I don't suppose you know which ZXR400 model the forks came from do you?
Rob
-
- Newbie
- Posts: 13
- Joined: Sat Apr 03, 2010 8:50 pm
- Location: South Cheshire
Found your original post and pictures. ZXR400H sorted.Olboy wrote:Thanks for the info John,john-b wrote:yeah i built that one front end is zxr400 rear wheel is rgv nikon pipes and lomas end cans, should also have ram pipes cant remember what breed though.
I think there are pics in this section somewhere
Ram air pipes are still on there. It still runs well. I need to rebuild the forks as one of the seals has gone and also tidy up some of the wiring as there is a big bunch of spade connectors sitting under the instruments. After that I'll get it on the road and plan to strip and clean over the winter. (I don't suppose you know which ZXR400 model the forks came from do you?
Rob
Rob
- 666damned
- Oil Injector
- Posts: 674
- Joined: Sat May 05, 2007 7:40 pm
- Location: Hull
nice 'starting'point for a project......enjoy this summer then get to work over winter.....so you've probably got about 2 weeks riding left........
'So,who's paranoid'.........The Damned's new album,released 10/11/2008 or available to d/load from...'officialdamned.com .....go on treat yourself........