KR1 Restoration
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
KR1 Restoration
Hi Guys,
I just sold my X7 so I am going to use some of the funds to start my KR1 restoration . I have had the bike for a while sat in the corner of my shed waiting for some love. I picked her up about 18 months ago for £100 and I decided she was worth saving as the headstock lugs are untouched and there isn't any damage and all of the threadserts are good. I have been collecting parts for a while now so I have a lot of excellent and NOS parts to go on her.
I draged her out and finished stripping her today. Had a bit of a battle getting the swing arm spindle out but I won in the end. I cleaned down the bottom engine mount area to make sure there was no sign of the dreaded cracking and all is well.
I'll be getting the frame and wheels off for powder coating over the next week or so.
The plan is this will be a standard restoration which is going to be quite slow if my past record is anything to go by
I'm going to put a wanted add up for things I need.
As I make progress I'll add more pics, don;t hold your breath though .
Cheers
Andrew
I just sold my X7 so I am going to use some of the funds to start my KR1 restoration . I have had the bike for a while sat in the corner of my shed waiting for some love. I picked her up about 18 months ago for £100 and I decided she was worth saving as the headstock lugs are untouched and there isn't any damage and all of the threadserts are good. I have been collecting parts for a while now so I have a lot of excellent and NOS parts to go on her.
I draged her out and finished stripping her today. Had a bit of a battle getting the swing arm spindle out but I won in the end. I cleaned down the bottom engine mount area to make sure there was no sign of the dreaded cracking and all is well.
I'll be getting the frame and wheels off for powder coating over the next week or so.
The plan is this will be a standard restoration which is going to be quite slow if my past record is anything to go by
I'm going to put a wanted add up for things I need.
As I make progress I'll add more pics, don;t hold your breath though .
Cheers
Andrew
Last edited by Bertie_Mollie on Fri Dec 22, 2017 11:54 am, edited 1 time in total.
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
-
- Site Admin
- Posts: 1382
- Joined: Tue Jul 25, 2006 11:34 am
- Location: South Wales (Old)
- Contact:
-
- Oil Injector
- Posts: 706
- Joined: Sun Sep 30, 2007 5:59 pm
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
I think the KR1 has been slightly in the "doldrums" in the shadow of the KR1S but I think this will change in time.
I'm doing the KR1 this time as I has a GWB KR1 in the past and already have the KR1S.
I'm really looking forward to it as I think the KR1 has it's own character.
Thanks for the moral support guys .
Oh, BTW here was our KR1 about 15 years ago.
I'm doing the KR1 this time as I has a GWB KR1 in the past and already have the KR1S.
I'm really looking forward to it as I think the KR1 has it's own character.
Thanks for the moral support guys .
Oh, BTW here was our KR1 about 15 years ago.
Last edited by Bertie_Mollie on Fri Dec 22, 2017 11:54 am, edited 1 time in total.
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
- tescr500
- Oil Injector
- Posts: 742
- Joined: Sat Aug 29, 2009 12:05 pm
- Location: hampshire
- twostrokesmoker
- Heavy Smoker
- Posts: 209
- Joined: Tue Nov 10, 2009 11:24 pm
- Location: Lowton, Nr Warrington
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
Attention she deserves did include a big hammer and a fair bit of swearing.dave32 wrote:Great to another Kr1 getting the attention it deserves!
Whats the motor like?
Brings back good memorys that pic,a proper team green type paintjob,prefer it over the later models.
Good luck
Dave
The top end is in the back of my wardrobe and is in really good condition. I'll just stick some new pistons and rings in and some KIPS seals. I need to strip the bottom end and have a look at the crank.
WRT the colours it will be GWB. I have some mint original side panels and a tail piece I got off Martin a while back. The fairing upper that came with the bike is perfect with no cracks, repairs or damage .
I think it has potential to make a really nice bike.
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
Hi Guys,
Got the frame / swingarm and various other sundrie parts back from triple S. Very nice job, paint not too thick and frame number still nice and clear.
I have started cleaning parts ready for fitting. Including the harness which was prepared using the "Wight Wizard Method". I have got the wheel bearings waiting for the wheels to be back from paint and the swing arm bearings are on order. Rear shock is also out for refurb.
Got the frame / swingarm and various other sundrie parts back from triple S. Very nice job, paint not too thick and frame number still nice and clear.
I have started cleaning parts ready for fitting. Including the harness which was prepared using the "Wight Wizard Method". I have got the wheel bearings waiting for the wheels to be back from paint and the swing arm bearings are on order. Rear shock is also out for refurb.
Last edited by Bertie_Mollie on Fri Dec 22, 2017 11:55 am, edited 1 time in total.
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
Started fitting some bits up while I'm waiting for the rear damper & wheels.
I am going to try make this as close to the original KR1 spec as possible. I have a box of fasteners which I am going to use where they are good enough so I have the right finishes. Looking through some of the spares I have I already noticed there are different upper rad brkts .
She is having a KR1 CDI, of course .
BTW - if anyone spots anything they don't think is right for a KR1 then please let me know
Cheers
Andrew
I am going to try make this as close to the original KR1 spec as possible. I have a box of fasteners which I am going to use where they are good enough so I have the right finishes. Looking through some of the spares I have I already noticed there are different upper rad brkts .
She is having a KR1 CDI, of course .
BTW - if anyone spots anything they don't think is right for a KR1 then please let me know
Cheers
Andrew
Last edited by Bertie_Mollie on Fri Dec 22, 2017 11:56 am, edited 1 time in total.
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
-
- Oil Injector
- Posts: 706
- Joined: Sun Sep 30, 2007 5:59 pm
Good pics why are you waiting for the rear shock, are you having it rebuilt (if so, where please) or have you got a new one, thought you had piles of stuff in stock ??
Is everything being replated or nice standard fixings with the aged look, (makes a nicer original resto in my book, that I would also ride on sunny days)
Is everything being replated or nice standard fixings with the aged look, (makes a nicer original resto in my book, that I would also ride on sunny days)
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
Hi Bott,
I am having the rear damper re built at Mick Gardener Racing http://www.mickgardnerracing.com/
I found a recommendation on here so I thought I'd try them. Might be best to wait till I get mine back before I give my aproval. Should be ready in the next couple of weeks.
I am searching though the big box of fixings I have for ones which are in good condition with the original finish. If they can be re used they are going on the bike. Hopefully I should have most but if not I'll see if I can source new ones from "Big K".
I didn't think I had the rectangular washer plate to hold on the swing arm protector so I checked availability and it is NLA. Fortunately I turned one up in a box in original "green" passivate finish .
Cheers
Andrew
I am having the rear damper re built at Mick Gardener Racing http://www.mickgardnerracing.com/
I found a recommendation on here so I thought I'd try them. Might be best to wait till I get mine back before I give my aproval. Should be ready in the next couple of weeks.
I am searching though the big box of fixings I have for ones which are in good condition with the original finish. If they can be re used they are going on the bike. Hopefully I should have most but if not I'll see if I can source new ones from "Big K".
I didn't think I had the rectangular washer plate to hold on the swing arm protector so I checked availability and it is NLA. Fortunately I turned one up in a box in original "green" passivate finish .
Cheers
Andrew
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum