power valves
-
- lurker
- Posts: 3
- Joined: Sun Feb 04, 2007 1:05 pm
power valves
hi, i have taken the power valves off my KR-1S and forgot to put any makings on them, is there any way i can figure out which way round they should be put back on? also how important is the tolerances in the power power valves?
- Tambo
- Heavy Smoker
- Posts: 441
- Joined: Tue Sep 12, 2006 9:10 pm
- Location: Scottish Borders
There's a small flat on the top of the valves that marks the 'out' direction of the valves.
There's a good description on the Team sparrow site as to which way these flats should be pointing as it's hard to make it out in my manual.
Failing that, take the exhausts off and peer up you'll soon see if they are 180 degrees out
There's a good description on the Team sparrow site as to which way these flats should be pointing as it's hard to make it out in my manual.
Failing that, take the exhausts off and peer up you'll soon see if they are 180 degrees out
Kr1s c3, vfr750fg, Dnepr MT11, Pegaso 650