Does anyone know if the stators on the '1' is the same as the '1s' ?
Mine stopped 20 minutes after completion and traced it to a faulty excitor coil. Put on a spare I picked up from a '1' - starts and runs, but not sure it's quite right. Might just be needing some carb adjustment, but thought I'd ask .
Cheers,
Tommy
Stators
- scooble
- Premix Junkie
- Posts: 1549
- Joined: Thu Jul 27, 2006 12:47 pm
- Location: West Sussex
- Contact:
- Tambo
- Heavy Smoker
- Posts: 441
- Joined: Tue Sep 12, 2006 9:10 pm
- Location: Scottish Borders
Don't have the part numbers Scooble, but they look identical, and resistance readings are spot-on. I don't suppose the stator can effect the timing anyway, as the pick-up is on the outside, and therefore as it was.
Yep, it's charging Dave. Pick-up is ok. Runs fine, but just feels 'tight' compared to when it was running with the faulty one it.
Have since noticed a kipps link missing damm that blue thread lock !! Hopefully that's the culprit
Yep, it's charging Dave. Pick-up is ok. Runs fine, but just feels 'tight' compared to when it was running with the faulty one it.
Have since noticed a kipps link missing damm that blue thread lock !! Hopefully that's the culprit
Kr1s c3, vfr750fg, Dnepr MT11, Pegaso 650
- Tambo
- Heavy Smoker
- Posts: 441
- Joined: Tue Sep 12, 2006 9:10 pm
- Location: Scottish Borders