Hi Guys,
I thought I would stick some pictures up of my recent project bike that i bought from Ted (Spondonbrain).
The cases had a hole in, the big end had gone one side and the RH barrel had some light damage. I built the engine back up with a good set of cases, my spare crank and sourced a good used barrel.
Apart from the non standard bodywork (which has a few cracks / repairs) and scuffing on the cans she really is a good bike. Stanchions are really good, rear damper has been rebuilt by Maxton, good alpha 10's, no damage / repairs to headstock lugs.
All done now and ready to go .
Latest KR1S Project
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
Latest KR1S Project
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
-
- Premix Junkie
- Posts: 1328
- Joined: Fri Apr 18, 2008 8:25 am
- Location: Solihull
Hi Martin,martin wrote:i am interested in your b2 you are rebuilding.
Not done anything for a while.
Crank is being re built as my spare went in this KR1S.
Still need the stanchions re chromed. I have had some polishing done.
As soon as there is a worthwhile update I'll follow up on my thread.
cheers
Andrew
GWB KR1s C2 - Now gone
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum
GWB KR1 - YES IT'S DONE!
ZXR400L PROJECT
AND NO S****Y H****A'S
Usque Ad Mortem Bibendum