RHS carburator

Twangled your powervalve grommit in your woodruff key? ask someone how to fix it here
Post Reply
jarno
Oil Injector
Posts: 706
Joined: Sat Aug 08, 2009 9:29 pm
Location: the netherlands

RHS carburator

Post by jarno »

cleaned my carbs today because the rhs was leaking
put them in the ultrason and checked everything(floothight etc)
the rhs is still leaking checked it and rebuild it about 7 times today but stil leaking. ](*,) ](*,)

what can it be?
banditbob
Heavy Smoker
Posts: 217
Joined: Sun Jun 17, 2012 9:09 pm
Location: perth scotland

needle

Post by banditbob »

Hi Jarno check the float needle!!!
dave32
Heavy Smoker
Posts: 472
Joined: Sun Oct 24, 2010 10:15 pm

Post by dave32 »

Leaking from the over flow pipe as in flooding?
If so check float height and as said that the needle valve is working and not sticking.
dirk
Heavy Smoker
Posts: 342
Joined: Mon Jul 30, 2007 8:18 pm
Location: Germany

Post by dirk »

Hello Jarno

I know that ...
For me it was the seal of the float chamber #-o

Greetings!
Dirk
KR-1S 1990
RG500 1987
RGV 250 1992
TZR250 (2MA) 1987
jarno
Oil Injector
Posts: 706
Joined: Sat Aug 08, 2009 9:29 pm
Location: the netherlands

Post by jarno »

thanks guys

i did check the floatneedle and it looks ok to me.
wil check it again today.
it is leaking thrue the overflopipe.
Luders
Avgas Sniffer
Posts: 3926
Joined: Fri Jun 18, 2010 11:29 am
Location: Oxfordshire

Post by Luders »

If it's coming from the overflow pipe check your float needle again.

I had this problem with them sticking and you could take them out and give them a clean, but would start pissing fuel out again after a while. I ended up replacing them and have not had this problem since.
jarno
Oil Injector
Posts: 706
Joined: Sat Aug 08, 2009 9:29 pm
Location: the netherlands

Post by jarno »

thanks luders.

sorted problem is gone.
cleaned the fload needle again now it stopped \:D/ \:D/

jarno
Post Reply