KR1 REAR CALIPER
-
- Heavy Smoker
- Posts: 101
- Joined: Thu Jul 07, 2011 8:49 pm
- Location: Co Kildare, Ireland.
KR1 REAR CALIPER
HI aLL
my 88 kr1 didnt come with either a caliper or caliper mount. Do KR1s or ones off anothermodel bike bolt up?
my 88 kr1 didnt come with either a caliper or caliper mount. Do KR1s or ones off anothermodel bike bolt up?
To fail is to not to have tried at all.....Push your boundaries!
- Mark66
- Light Smoker
- Posts: 37
- Joined: Mon Jul 11, 2011 12:44 am
- Location: Glasgow, Scotland
Now we know. Deffo the VJ22 though. been checking it. Interesting arrangement on the VJ21, don't think I have ever seen a combined hanger/caliper before. As I have it I think I should offer it up and see, in the interest of science and all that. It didn't cost me much and there wasn't a picture so I'll give it a go and let you know. Who needs a back brake anyway my back wheel is usually skimming the tarmac, except when it's snowing.
Old Age Petrolhead
-
- Premix Junkie
- Posts: 1587
- Joined: Wed May 16, 2007 2:24 am
rear caliper from other bikes
RGV VJ22 & VJ23 share the same rear caliper as KR-1 B, C, D (All KR-1's)
ZXR250a (Ribbed e-box frame) and GPX250 are 'similar' 2-pot sliding caliper however these two mount above the swingarm so the bleed vent is around the other way
ZXR250a (Ribbed e-box frame) and GPX250 are 'similar' 2-pot sliding caliper however these two mount above the swingarm so the bleed vent is around the other way
Last edited by KR-1R on Mon Mar 23, 2015 10:18 pm, edited 2 times in total.
-
- Newbie
- Posts: 17
- Joined: Fri Jun 28, 2013 3:24 pm
- Location: Perth, West Coast, Australia
Re: KR1 REAR CALIPER
my bike has the same problem
good to know a vj22 is the same as they are a 2 piston calliper as they are common as over here
this forum is awesome
good to know a vj22 is the same as they are a 2 piston calliper as they are common as over here
this forum is awesome