My first KR1S
-
- Oil Injector
- Posts: 590
- Joined: Thu Dec 12, 2013 9:58 pm
- Location: York
My first KR1S
Just bought this, I heard it's been owned by a forum member previously? Any history or info would be great.
Last edited by DougB on Sun Jun 21, 2015 1:05 pm, edited 3 times in total.
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: My first KR1S
Welcome to the forum =D>
Where are you based and where did you buy the bike from?
It looks nice, I don't think I have seen it before, but someone on here will recognise it
Cheers,
Bernie
Where are you based and where did you buy the bike from?
It looks nice, I don't think I have seen it before, but someone on here will recognise it
Cheers,
Bernie
Firecracker Red and Grey C3 300
-
- Oil Injector
- Posts: 590
- Joined: Thu Dec 12, 2013 9:58 pm
- Location: York
Re: My first KR1S
Hi Bernie,
I live about 10 miles north of York and I got the bike locally from a lad that lives a few miles over, friend of a friend called Dan. I'm hoping to put it as much back to standard as I can given what bits are around now that might be a bit of a tall order!
I live about 10 miles north of York and I got the bike locally from a lad that lives a few miles over, friend of a friend called Dan. I'm hoping to put it as much back to standard as I can given what bits are around now that might be a bit of a tall order!
- Top-shaggy
- Premix Junkie
- Posts: 1966
- Joined: Mon Oct 31, 2011 11:09 pm
- Location: Derbyshire
Re: My first KR1S
I don't remember seeing that bike before either...
If it takes more than 2strokes then your just playing at it..
-
- Premix Junkie
- Posts: 1305
- Joined: Fri Apr 18, 2008 9:41 pm
- Location: Essex. Depeche Mode, Town
Re: My first KR1S
Welcome
Ive seen it before not sure if its on here or ebay as i remember the end cans and bracket.
Ive seen it before not sure if its on here or ebay as i remember the end cans and bracket.
Ernest borgnine.
Best film, The Vikings
Best film, The Vikings
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
-
- Oil Injector
- Posts: 590
- Joined: Thu Dec 12, 2013 9:58 pm
- Location: York
Re: My first KR1S
On the bottom of the reg plate it's got a little KR-1S.co.uk badge..
I'm going to get it roadworthy for next year, hopefully have the tail unit back to standard, and see how it goes then planning to strip it over the next winter to refurb it and give it a respray.
Only issues at the moment is I'm not sure what's missing at the back. I've got some complete rear footrest hangers coming, a pillion seal and a sprocket cover as that's missing. Needs a rear shock re-build and a battery, has no pillion seat locking mech at all.
Only things not needed for MoT time but I want to sort, left fairing to frame bracket isn't original and it'd be nice to put it on standard end cans. Thinking I might as well go out and start trying to dig up hens teeth in the garden!..
I'm going to get it roadworthy for next year, hopefully have the tail unit back to standard, and see how it goes then planning to strip it over the next winter to refurb it and give it a respray.
Only issues at the moment is I'm not sure what's missing at the back. I've got some complete rear footrest hangers coming, a pillion seal and a sprocket cover as that's missing. Needs a rear shock re-build and a battery, has no pillion seat locking mech at all.
Only things not needed for MoT time but I want to sort, left fairing to frame bracket isn't original and it'd be nice to put it on standard end cans. Thinking I might as well go out and start trying to dig up hens teeth in the garden!..
-
- Oil Injector
- Posts: 590
- Joined: Thu Dec 12, 2013 9:58 pm
- Location: York
Re: My first KR1S
I can't seem to reply to topics, they need to be approved but they aren't getting through?
-
- Oil Injector
- Posts: 590
- Joined: Thu Dec 12, 2013 9:58 pm
- Location: York
Re: My first KR1S
I'm going to get it roadworthy for this year and have some fun on it, then try and improve it a bit over the next winter. Having some trouble with bits and information but the stuff on this site's already helped a lot!500bernie wrote:What are your plans for the bike?
- Binetta Steve
- Oil Injector
- Posts: 949
- Joined: Sat Nov 10, 2012 6:13 pm
- Location: North Wales
Re: My first KR1S
Welcome to the forum , its a great place for support and advice. Lots of Kr bits on fleabay , plus some members on here are a great source of hard to get bits.
Steve
Steve
-
- Oil Injector
- Posts: 590
- Joined: Thu Dec 12, 2013 9:58 pm
- Location: York
Re: My first KR1S
Cheers Steve, this forum is a lifeline with bikes like these! I've always had Yams so new to fixing up a Kawa.. Been getting plenty of help and info and the credit card is already emptying into Ebay!Binetta Steve wrote:Welcome to the forum , its a great place for support and advice. Lots of Kr bits on fleabay , plus some members on here are a great source of hard to get bits.
Steve
-
- Heavy Smoker
- Posts: 207
- Joined: Tue Apr 12, 2011 11:14 am
- Location: Worcestershire
Re: My first KR1S
Welcome!
I'm in process of top end refresh on mine, so simple to work on!
I'm in process of top end refresh on mine, so simple to work on!
-
- Oil Injector
- Posts: 590
- Joined: Thu Dec 12, 2013 9:58 pm
- Location: York
Re: My first KR1S - spot the difference!!
Well it's had a part top end rebuild and about four hundred quid thrown at it and I'm not sure where it went! Looking a bit better though I think. Need to get out and ride it now!
Last edited by DougB on Sun Jun 21, 2015 1:02 pm, edited 1 time in total.
- Binetta Steve
- Oil Injector
- Posts: 949
- Joined: Sat Nov 10, 2012 6:13 pm
- Location: North Wales
Re: My first KR1S
Its got new rear pegs, proper footpegs , a new back end. But i tell you what that blo..dy pushbike hasnt moved an inch!
Looking good.
Steve
Looking good.
Steve
-
- Oil Injector
- Posts: 590
- Joined: Thu Dec 12, 2013 9:58 pm
- Location: York
Re: My first KR1S
Yeah that pushbike seemed like a good idea at the timeBinetta Steve wrote:Its got new rear pegs, proper footpegs , a new back end. But i tell you what that blo..dy pushbike hasnt moved an inch!
Looking good.
Steve