Hi,
Does anybody know any good option to these goofy stuff, doesn't work, not long enough and fragile.
http://www.ebay.de/itm/KAWASAKI-KR1-KR1 ... 3cdcd799f2.
Or when can I get the original ones?
Thanks
Mouser
KIPS linkage
-
- Heavy Smoker
- Posts: 118
- Joined: Tue Nov 05, 2013 9:57 pm
- Location: Luxemburg
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: KIPS linkage
I believe BDK might make them, but they won't be cheap.
- 500bernie
- Avgas Sniffer
- Posts: 3396
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: KIPS linkage
The Ebay listing posted is from James at BDK, but through Ebay.de (Germany).
Firecracker Red and Grey C3 300
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: KIPS linkage
I didn't notice that Bernie. They seem over priced for what they are. The ones I had made up had a left and right thread with centre turn buckle and he only charged me £5 per arm.
Here it is in english...
http://www.ebay.co.uk/itm/KAWASAKI-KR1- ... 547wt_1399
Here it is in english...
http://www.ebay.co.uk/itm/KAWASAKI-KR1- ... 547wt_1399
- martin
- Premix Junkie
- Posts: 1610
- Joined: Sat Jan 13, 2007 10:35 pm
- Location: luton,beds
Re: KIPS linkage
I fitted a set to garys engine. one thing I would say about them is the fact that you can adjust them as you are fitting them. meaning you can get the powervalves spot on.
current bikes
fully restored green/white kr1 b2
fully restored green/white kr1 b2
-
- Heavy Smoker
- Posts: 118
- Joined: Tue Nov 05, 2013 9:57 pm
- Location: Luxemburg
Re: KIPS linkage
But their really not solid at all...and the length is not correct, unless you only turn the rod 1turn in, but then it won't hold more than 5 minutes (riding).
Found this then
viewtopic.php?f=24&t=5180&hilit=KIPS+linkage
Contacted Leewc, but got no response.
Anybody knows if he's still producing them?
Thanks
Mouser
Found this then
viewtopic.php?f=24&t=5180&hilit=KIPS+linkage
Contacted Leewc, but got no response.
Anybody knows if he's still producing them?
Thanks
Mouser
- martin
- Premix Junkie
- Posts: 1610
- Joined: Sat Jan 13, 2007 10:35 pm
- Location: luton,beds
- 500bernie
- Avgas Sniffer
- Posts: 3396
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: KIPS linkage
Hi
That turnbuckle will not move due to the vibration of the bike, once it is set it will stay put.
That turnbuckle will not move due to the vibration of the bike, once it is set it will stay put.
Firecracker Red and Grey C3 300
-
- Light Smoker
- Posts: 32
- Joined: Wed Feb 13, 2013 6:39 am
- Location: Notts
Re: KIPS linkage
I'm going to use rose bearings and turn up my own rods. I used the arms, balls and sockets from a remote control car on my first Kr1 many years ago, which is where I suspect BDK's come from.
-
- Heavy Smoker
- Posts: 118
- Joined: Tue Nov 05, 2013 9:57 pm
- Location: Luxemburg
Re: KIPS linkage
Yeah, possible.
Much too expensive for the crap it is.
Much too expensive for the crap it is.