At Last......Putting it back together

dmac · Post by **dmac** » Sat Apr 05, 2014 7:35 pm

Have to say Bernie, your making the rest of us look bad

Top Job =D>

Post by **500bernie** » Sun Apr 06, 2014 2:07 am

Just finished re-routing the wiring harness, bit of a bugger but sorted now

All the electrics connected (except the horn and side stand switch, which I need to replace).
Just need to sort out all the fluids and get a new battery now.

pablo · Post by **pablo** » Sun Apr 06, 2014 6:13 pm

I might have a horn and side stand switch Bernie.

Post by **500bernie** » Sun Apr 06, 2014 8:16 pm

Hi Paul,
The side stand switch would be great if you can find it

I found my horn

Cheers
Bernie

Binetta Steve · Post by **Binetta Steve** » Sun Apr 06, 2014 8:20 pm

Bernie , I hesitate to say , but we are about to witness a "Ring a ding ding " moment !
Is the full sales team from Solvol, Cradley and Mr Martin going to be present at the memorable start?

Steve

Post by **500bernie** » Sun Apr 06, 2014 8:47 pm

Hi Steve,
A cinematic moment, I will video the event.
I am a bit nervous, aircooled are a fair bit easier. I am really busy this week, but I hope to get some coolant, gear oil and some more Motul 800.
Cheers
Bernie

Binetta Steve · Post by **Binetta Steve** » Sun Apr 06, 2014 9:19 pm

Bernie you now have 8300 views I m prepared to bring the coolant , oil and fuel on a Solvol Autosol polished tray just to witness the 300cc of Martin inspired power. Just name the date !!,!,!
Ps I will probably have to bring a bottle of Bushmills for the spanner monkey

Post by **500bernie** » Mon Apr 07, 2014 9:34 am

Thanks Steve, this has been a long time coming.
I need to get her fired up, it will give this project the boost it needs to ensure it is spot on for Japfest.
Cheers,
Bernie

I need to get some Bushmills

tescr500 · Post by **tescr500** » Wed Apr 16, 2014 8:20 pm

Credit to you Bernie looking vely vely good =D> =D> =D>

Luders · Post by **Luders** » Wed Apr 16, 2014 10:11 pm

A full page of no pics = what's occurring?

teerex · Post by **teerex** » Wed Apr 16, 2014 10:22 pm

I'd be very proud of that Bernie, and I like shiny me

Post by **500bernie** » Thu Apr 17, 2014 6:47 am

Hi Guys,
Been really busy at work.
I bought a new battery and set up the kips valves last night, it was a bit of a nightmare as for some reason the outer valves had flipped around the wrong way. It had me baffled for a few hours

But all sorted now, just need to put the pipes back on and get her started

And get some photos posted

Post by **500bernie** » Thu Apr 24, 2014 11:53 pm

Ordered my oils from the Oilman

they should arrive Friday.
Just put some coolant in, should be fun as I have only ever had aircooled bikes [-o<
The standard set up takes 1.5L but I have only got 500ml in so far (tips greatly appreciated) as I was expecting to get about 1.7L in with the bigger rad.

Post by **500bernie** » Fri Apr 25, 2014 7:22 am

Checked under the bike this morning, pleased to find no coolant on the floor $\:D/$
Just waiting for postie with my transoil and 2T.

Luders · Post by **Luders** » Fri Apr 25, 2014 7:30 am

Just give it a few heat cycles first before you start revving it

KR-1S.co.uk Forum

At Last......Putting it back together

Re: At Last......Putting it back together

Re: At Last......Putting it back together

Re: At Last......Putting it back together

Re: At Last......Putting it back together

Re: At Last......Putting it back together

Re: At Last......Putting it back together

Re: At Last......Putting it back together

Re: At Last......Putting it back together

Re: At Last......Putting it back together

Re: At Last......Putting it back together

Re: At Last......Putting it back together

Re: At Last......Putting it back together

Re: At Last......Putting it back together

Re: At Last......Putting it back together

Re: At Last......Putting it back together