At Last......Putting it back together

Show us that box of bits in your shed!
Post Reply
User avatar
JanBros
Avgas Sniffer
Posts: 3319
Joined: Wed Jul 26, 2006 11:50 pm
Location: the land of Francorchamps

Re: At Last......Putting it back together

Post by JanBros »

500bernie wrote:Ordered my oils from the Oilman :) they should arrive Friday.
Just put some coolant in, should be fun as I have only ever had aircooled bikes [-o<
The standard set up takes 1.5L but I have only got 500ml in so far (tips greatly appreciated) as I was expecting to get about 1.7L in with the bigger rad.
befor starting, lean the bike left and right, especialy left to get most air out. should make room for some more water.
after starting, watch the level, and you'll probably will be able to add some more.
My ultimate goal is to die young as late as possible !
User avatar
500bernie
Avgas Sniffer
Posts: 3402
Joined: Mon Aug 02, 2010 10:22 am
Location: Teesside

Re: At Last......Putting it back together

Post by 500bernie »

Thanks Jan :)
Firecracker Red and Grey C3 300
User avatar
tescr500
Oil Injector
Posts: 742
Joined: Sat Aug 29, 2009 12:05 pm
Location: hampshire

Re: At Last......Putting it back together

Post by tescr500 »

Whens the big start up then Bernie me ole cocker.
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
User avatar
500bernie
Avgas Sniffer
Posts: 3402
Joined: Mon Aug 02, 2010 10:22 am
Location: Teesside

Re: At Last......Putting it back together

Post by 500bernie »

Hi Wayne,
When I get home 8-[
Firecracker Red and Grey C3 300
headcoats
Avgas Sniffer
Posts: 2120
Joined: Sat Jun 09, 2007 10:10 am
Location: Pig on the wall country

Re: At Last......Putting it back together

Post by headcoats »

Always nerve wracking first start up 8-[
Can it yer old boiler
User avatar
tescr500
Oil Injector
Posts: 742
Joined: Sat Aug 29, 2009 12:05 pm
Location: hampshire

Re: At Last......Putting it back together

Post by tescr500 »

Well you home yet :roll: :roll: :roll: :lol: :lol: :lol:
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
User avatar
500bernie
Avgas Sniffer
Posts: 3402
Joined: Mon Aug 02, 2010 10:22 am
Location: Teesside

Re: At Last......Putting it back together

Post by 500bernie »

Hi Wayne,
Yes I am at home, put the pipes back on yesterday and the LH pipe was foulung the side stand, eventually tracked it down to the spring being on upside down :(
Then I got side tracked after I could not find my aux petrol tank, then I realised I did not have a Y connector for the fuel lines.
A bit of a wasted day :(
Firecracker Red and Grey C3 300
User avatar
Top-shaggy
Premix Junkie
Posts: 1966
Joined: Mon Oct 31, 2011 11:09 pm
Location: Derbyshire

Re: At Last......Putting it back together

Post by Top-shaggy »

Ooooh Mr B.. Your just a big tease :D :D :D
If it takes more than 2strokes then your just playing at it..
Luders
Avgas Sniffer
Posts: 3926
Joined: Fri Jun 18, 2010 11:29 am
Location: Oxfordshire

Re: At Last......Putting it back together

Post by Luders »

Stop procrastinating and get it fired up!
User avatar
500bernie
Avgas Sniffer
Posts: 3402
Joined: Mon Aug 02, 2010 10:22 am
Location: Teesside

Re: At Last......Putting it back together

Post by 500bernie »

Luders wrote:Stop procrastinating and get it fired up!
If I knew what it was, I would stop doing it :oops:

Remind me......how do you load a video into a post :wink:
Firecracker Red and Grey C3 300
Luders
Avgas Sniffer
Posts: 3926
Joined: Fri Jun 18, 2010 11:29 am
Location: Oxfordshire

Re: At Last......Putting it back together

Post by Luders »

I just upload my video's to boobtube and post a linky
User avatar
tescr500
Oil Injector
Posts: 742
Joined: Sat Aug 29, 2009 12:05 pm
Location: hampshire

Re: At Last......Putting it back together

Post by tescr500 »

yeah come on Bernie play the game, could do with a bit of 2 stroke engine noise porn :lol: :lol: :lol: :roll: :roll: :roll:
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
Luders
Avgas Sniffer
Posts: 3926
Joined: Fri Jun 18, 2010 11:29 am
Location: Oxfordshire

Re: At Last......Putting it back together

Post by Luders »

I think he needs to get it through the heat cycles first Wayne
User avatar
tescr500
Oil Injector
Posts: 742
Joined: Sat Aug 29, 2009 12:05 pm
Location: hampshire

Re: At Last......Putting it back together

Post by tescr500 »

Luders wrote:I think he needs to get it through the heat cycles first Wayne

yeah bet he's popped out to buy a bottle as well :lol: :lol: :lol:
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
User avatar
tescr500
Oil Injector
Posts: 742
Joined: Sat Aug 29, 2009 12:05 pm
Location: hampshire

Re: At Last......Putting it back together

Post by tescr500 »

Well anyone know what happened did we have lift off 250 cc of snarling death :lol: :lol: :lol:
No Matter How Messy Things Get You Can Always Clean Them Up.
MY MAMMA TOLD ME, IF YOU AIN'T GOT ANY PROBLEMS DON'T MAKE ONE.
TIME IS PRECIOUS WASTE IT WISELY
Post Reply