Final KR Based Race Bike Project
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: Final KR Based Race Bike Project
Thank Steve, thanks Paul. I should have the bodywork on it this time next week doing the vinyl, so you will get a better idea of the final clothed results soon.
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: Final KR Based Race Bike Project
Bit more pipe work, I've tacked both sides up now and removed the wheel the get them even both sides. I had some 10mm ally bar, so I taped my mini spirit level to it and ran it across the ends of the cans to get them level.




-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: Final KR Based Race Bike Project
Just wanted to wheel it out the garage and get a better look at the exhausts from a distance.


-
- Oil Injector
- Posts: 706
- Joined: Sat Aug 08, 2009 9:29 pm
- Location: the netherlands
Re: Final KR Based Race Bike Project
awesome looking bike Ben =D> =D> =D>
Kr1s C1 zeus blue
Kr1s c2 black green
ZXR400 SP
ZXR250A
Kr1s c2 black green
ZXR400 SP
ZXR250A
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: Final KR Based Race Bike Project
Thanks Jarno. Jan, I'm guessing it would look something like this in relation to the exhaust and seat unit.


- JanBros
- Avgas Sniffer
- Posts: 3317
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
Re: Final KR Based Race Bike Project
it's absolutly perfect like it is Ben =D>
My ultimate goal is to die young as late as possible !
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: Final KR Based Race Bike Project
Base coat is complete on the bodywork now, so just doing the stickers and masking before I send it back to have the black finished and lacquer applied.


-
- Oil Injector
- Posts: 706
- Joined: Sat Aug 08, 2009 9:29 pm
- Location: the netherlands
Re: Final KR Based Race Bike Project
wow =D> =D> =D>
Kr1s C1 zeus blue
Kr1s c2 black green
ZXR400 SP
ZXR250A
Kr1s c2 black green
ZXR400 SP
ZXR250A
-
- Oil Injector
- Posts: 926
- Joined: Sat Mar 22, 2008 5:42 pm
- Location: retford n,nott`s working in cotswolds
- Contact:
Re: Final KR Based Race Bike Project
love it.seem's to all flow to me...ready for attack
- si.likes.guiness
- Heavy Smoker
- Posts: 197
- Joined: Sat May 24, 2008 7:49 pm
- Location: chesterfield
Re: Final KR Based Race Bike Project
looks fooking lovely that ben 

ive seen more tarts than mr kipling
- Top-shaggy
- Premix Junkie
- Posts: 1966
- Joined: Mon Oct 31, 2011 11:09 pm
- Location: Derbyshire
Re: Final KR Based Race Bike Project
=D> =D> =D>
Wish it was sat in my garage
Wish it was sat in my garage

If it takes more than 2strokes then your just playing at it..
- 500bernie
- Avgas Sniffer
- Posts: 3402
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: Final KR Based Race Bike Project
VERY NICE =D> =D> =D>
Would it have a detrimental effect on the performance of the pipes if they had a flat on the sides? (Where they bulge through the belly pan), I have been trying to visualise how it would effect the reflected pulse, but it is beyond me
Would it have a detrimental effect on the performance of the pipes if they had a flat on the sides? (Where they bulge through the belly pan), I have been trying to visualise how it would effect the reflected pulse, but it is beyond me

Firecracker Red and Grey C3 300
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: Final KR Based Race Bike Project
As far as I'm aware, it's volume which counts, so a flat (so long as the volume remained the same), would not make a difference to their performance.
As things stand, these pipes give better clearance than what the lomas pipes offer, so I should get at least another 3° of lean angle out of them before they become an issue.
As things stand, these pipes give better clearance than what the lomas pipes offer, so I should get at least another 3° of lean angle out of them before they become an issue.
- 500bernie
- Avgas Sniffer
- Posts: 3402
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: Final KR Based Race Bike Project
That would never be a problem for me,
(do the standard pipes have a flat in that spot to increase ground clearance?)

(do the standard pipes have a flat in that spot to increase ground clearance?)
Firecracker Red and Grey C3 300
-
- Premix Junkie
- Posts: 1588
- Joined: Wed May 16, 2007 2:24 am
Re: Final KR Based Race Bike Project
a proper seat - not the humpy, droopy pinched and tapered like a pooh of the final years...

mmm boobs
...
or hang down like truckers' balls
depends on personal preference?
bitchn'
with all the weight loss and centralisation I bet it will feel so different

mmm boobs

or hang down like truckers' balls
depends on personal preference?

bitchn'
with all the weight loss and centralisation I bet it will feel so different