2x engine build
-
- Heavy Smoker
- Posts: 342
- Joined: Fri Mar 07, 2014 3:22 pm
Re: 2x engine build
mk2 front end is on
engine is sort of back in
ally shiney ally mk2 rear subframe
engine is sort of back in
ally shiney ally mk2 rear subframe
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: 2x engine build
Awesome, overtime required with the Solvol to bring that up to mirror finish :
It's probably the angle you have took the photos from, but what is the ground clearance at the lowest point on that bottom pot?
Cheers
Bernie
It's probably the angle you have took the photos from, but what is the ground clearance at the lowest point on that bottom pot?
Cheers
Bernie
Firecracker Red and Grey C3 300
- JanBros
- Avgas Sniffer
- Posts: 3306
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
Re: 2x engine build
a better picture on page 5 shows there is plenty500bernie wrote: It's probably the angle you have took the photos from, but what is the ground clearance at the lowest point on that bottom pot?
Cheers
Bernie
My ultimate goal is to die young as late as possible !
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: 2x engine build
Cheers Jan
Gary when I am next passing do you want me to pop in with my Solvol, I am running out of things to polish (I only have my spare calipers to finish)
After that I am going to have to get myself a new project
Cheers
Bernie
Gary when I am next passing do you want me to pop in with my Solvol, I am running out of things to polish (I only have my spare calipers to finish)
After that I am going to have to get myself a new project
Cheers
Bernie
Firecracker Red and Grey C3 300
-
- Oil Injector
- Posts: 800
- Joined: Mon Nov 05, 2007 4:19 pm
- Location: london
Re: 2x engine build
Solvol rehab for you again, Bernie
-
- Oil Injector
- Posts: 590
- Joined: Thu Dec 12, 2013 9:58 pm
- Location: York
Re: 2x engine build
Enjoying following your build, looks brilliant, can't wait to see more of it coming together..
-
- Heavy Smoker
- Posts: 342
- Joined: Mon Jul 30, 2007 8:18 pm
- Location: Germany
Re: 2x engine build
lovely project. =D>
here someone is making a similar project:
http://www.2t-special.it/forum/viewtopi ... 4&start=60
Cheers
Dirk
here someone is making a similar project:
http://www.2t-special.it/forum/viewtopi ... 4&start=60
Cheers
Dirk
KR-1S 1990
RG500 1987
RGV 250 1992
TZR250 (2MA) 1987
RG500 1987
RGV 250 1992
TZR250 (2MA) 1987
-
- Heavy Smoker
- Posts: 342
- Joined: Fri Mar 07, 2014 3:22 pm
Re: 2x engine build
thats a bike alex in italy is building for a customer
he did what he was paid to do then handed it back to he owner he had to fit he engine and make some exhausts and fit a wider rear wheel ,thats why it stopped months ago ,the owner doesnt want to posta about it
ive been in contact with him for nearly a year
another was built as a race bike in 2006 i think by someone else
and ive been in contact with a lad who did a lot of work on that one ,it has jolly moto pipes on that one
he did what he was paid to do then handed it back to he owner he had to fit he engine and make some exhausts and fit a wider rear wheel ,thats why it stopped months ago ,the owner doesnt want to posta about it
ive been in contact with him for nearly a year
another was built as a race bike in 2006 i think by someone else
and ive been in contact with a lad who did a lot of work on that one ,it has jolly moto pipes on that one
-
- Heavy Smoker
- Posts: 342
- Joined: Fri Mar 07, 2014 3:22 pm
Re: 2x engine build
did a bit more
tank and seat were just to get an idea of how it will look
tank and seat were just to get an idea of how it will look
-
- Heavy Smoker
- Posts: 342
- Joined: Mon Jul 30, 2007 8:18 pm
- Location: Germany
Re: 2x engine build
I am afraid that you have on the right side too little cornering clearance ...
KR-1S 1990
RG500 1987
RGV 250 1992
TZR250 (2MA) 1987
RG500 1987
RGV 250 1992
TZR250 (2MA) 1987
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: 2x engine build
Are you calling Gary fat?dirk wrote:I am afraid that you have on the right side too little cornering clearance ...
- JanBros
- Avgas Sniffer
- Posts: 3306
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
Re: 2x engine build
viewtopic.php?f=8&t=12100&start=60dirk wrote:I am afraid that you have on the right side too little cornering clearance ...
My ultimate goal is to die young as late as possible !
-
- Heavy Smoker
- Posts: 342
- Joined: Fri Mar 07, 2014 3:22 pm
Re: 2x engine build
the pipe will not touch the floor
it is going to be another 2 inch higher at the front and 30mm at the back
once its sorted , tyre on the front is just to stop rinm scratching its not blown up or wide enough
so once its coated and it gets a new tyre it will be a good bit higher ,and rear is getting 30mm jackup
ive lent bike well over and its almost got bar on the floor before pipe is ,
camera must be making it look worse than it is
it is going to be another 2 inch higher at the front and 30mm at the back
once its sorted , tyre on the front is just to stop rinm scratching its not blown up or wide enough
so once its coated and it gets a new tyre it will be a good bit higher ,and rear is getting 30mm jackup
ive lent bike well over and its almost got bar on the floor before pipe is ,
camera must be making it look worse than it is
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: 2x engine build
It doesn't look that bad to me from the photos Gary
-
- Heavy Smoker
- Posts: 342
- Joined: Fri Mar 07, 2014 3:22 pm
Re: 2x engine build
its not bad at all , no way will it touchLuders wrote:It doesn't look that bad to me from the photos Gary