finally started
-
- Heavy Smoker
- Posts: 364
- Joined: Wed Jun 03, 2009 9:12 pm
- Location: rochester kent
Re: finally started
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
-
- Heavy Smoker
- Posts: 364
- Joined: Wed Jun 03, 2009 9:12 pm
- Location: rochester kent
Re: finally started
progress this week and over the weekend tank ready for lacquer and fairing next for paint
ms/ab306/dougindoors/image_zpspas6cpum.jpeg[/IMG][/URL]
ms/ab306/dougindoors/image_zpspas6cpum.jpeg[/IMG][/URL]
Last edited by dougindoors on Sun May 22, 2016 6:48 pm, edited 1 time in total.
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
- Binetta Steve
- Oil Injector
- Posts: 949
- Joined: Sat Nov 10, 2012 6:13 pm
- Location: North Wales
-
- Heavy Smoker
- Posts: 364
- Joined: Wed Jun 03, 2009 9:12 pm
- Location: rochester kent
Re: finally started
Cheers doug
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
- Top-shaggy
- Premix Junkie
- Posts: 1966
- Joined: Mon Oct 31, 2011 11:09 pm
- Location: Derbyshire
Re: finally started
Liking very smart ...The silver is a bobby dazzler
If it takes more than 2strokes then your just playing at it..
-
- Heavy Smoker
- Posts: 364
- Joined: Wed Jun 03, 2009 9:12 pm
- Location: rochester kent
Re: finally started
Why thank u kind sir, you did say that before as I recall. Yes well under way, tank gets lacquered tomorrow whilst my pal is prepping the fairing, as I was being lazy and he needs some flating theropey lol
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
-
- Premix Junkie
- Posts: 1087
- Joined: Thu Jul 27, 2006 9:43 am
- Location: Yorkshire
- Contact:
Re: finally started
Hopefully the seats are away being covered in the correct shade of red... [-o<
Kawasaki KR250 Tandem Twin (x4) & KS-II 80,
Yamaha RD350LC,
Suzuki GSX-R750RK & RB50 Gag.
Yamaha RD350LC,
Suzuki GSX-R750RK & RB50 Gag.
-
- Heavy Smoker
- Posts: 364
- Joined: Wed Jun 03, 2009 9:12 pm
- Location: rochester kent
Re: finally started
not yet I contacted pit replica, you remember I ended up with a black on last time, they are going to do some red ones at the end of the month, what shade who knows.
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: finally started
Looks smart as
-
- Heavy Smoker
- Posts: 364
- Joined: Wed Jun 03, 2009 9:12 pm
- Location: rochester kent
Re: finally started
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
-
- Heavy Smoker
- Posts: 364
- Joined: Wed Jun 03, 2009 9:12 pm
- Location: rochester kent
Re: finally started
Just keep polishing, polishing, polishing, it's worse than flatting primer.
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
-
- Heavy Smoker
- Posts: 364
- Joined: Wed Jun 03, 2009 9:12 pm
- Location: rochester kent
Re: finally started
s874.photobucket.com/user/dougindoors/media/image_zpstexbhu63.jpeg.html][/URL]
More progress today on paintwork belly pan painted and fitted. Run her up after 2 years. 15 minutes of kicking, I realised I'm not as young and fit as I used to be, bump start down the hill no, pushed her back up, by then totally knackered. Had a 5 minute break to get my breath back and had another go, she fired up with major amounts of smoke, but after a short while that started to clear, but I am playing safe running a 50-1 premix along with the autolube, but sad news, the Rattle is still there, but the good news is at the correct idle speed of 1350rpm no noise, probably was always ok I just tried to set the idle to low. Happy days road her up and down the road a few times just to annoy the neighbours surprising how quickly people close their windows lol. Only managed to get to second gear, bloody hell for a 250 does it get a move on, well back on the ramp to continue with the paint work and maybe rebuild the carbs it I can find the rebuild kits on evilbay. Now waiting for the fairing to be prepared for paint and the red seat cover, then MOT
EDITED LOL
More progress today on paintwork belly pan painted and fitted. Run her up after 2 years. 15 minutes of kicking, I realised I'm not as young and fit as I used to be, bump start down the hill no, pushed her back up, by then totally knackered. Had a 5 minute break to get my breath back and had another go, she fired up with major amounts of smoke, but after a short while that started to clear, but I am playing safe running a 50-1 premix along with the autolube, but sad news, the Rattle is still there, but the good news is at the correct idle speed of 1350rpm no noise, probably was always ok I just tried to set the idle to low. Happy days road her up and down the road a few times just to annoy the neighbours surprising how quickly people close their windows lol. Only managed to get to second gear, bloody hell for a 250 does it get a move on, well back on the ramp to continue with the paint work and maybe rebuild the carbs it I can find the rebuild kits on evilbay. Now waiting for the fairing to be prepared for paint and the red seat cover, then MOT
EDITED LOL
Last edited by dougindoors on Tue May 31, 2016 11:23 am, edited 1 time in total.
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
-
- Avgas Sniffer
- Posts: 3926
- Joined: Fri Jun 18, 2010 11:29 am
- Location: Oxfordshire
Re: finally started
=D> love it
-
- Premix Junkie
- Posts: 1087
- Joined: Thu Jul 27, 2006 9:43 am
- Location: Yorkshire
- Contact:
Re: finally started
Blimey ! I think anyone would be knackered after that !dougindoors wrote:after 2 years 15 minutes of kicking
Great to see it nearly done Doug, keep up the good work.
Kawasaki KR250 Tandem Twin (x4) & KS-II 80,
Yamaha RD350LC,
Suzuki GSX-R750RK & RB50 Gag.
Yamaha RD350LC,
Suzuki GSX-R750RK & RB50 Gag.
-
- Heavy Smoker
- Posts: 364
- Joined: Wed Jun 03, 2009 9:12 pm
- Location: rochester kent
Re: finally started
seat cover ordered and awaiting deliver, also carb rebuild kits on order from the same guy that does the gaskets in Japan, again waiting for delivery, no worries away for two weeks next week, so should be waiting for me at work when I return, along with the AR parts I have started collecting. bikus lurgious again.
1984 Kawasaki KR250A
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit
no projects, OOPS!1987 Kawasaki AR125B4
Every 2 in 1 poeple are schizophrenic
If you can not fix it with a hammer it must be electrical
2 Smokey and they bandit