does any one know of a billet fuel cap that fits the kr1/s tank?
cheers
fuel cap
- Garry
- Premix Junkie
- Posts: 1436
- Joined: Tue Jul 25, 2006 8:01 pm
- Location: E.Midlands
Re: fuel cap
If you search for 'kawasaki billet fuel cap' on ebay you will find them
Perhaps not specific to KR!S but lots of kwak tanks had the same caps so just find out which others are the same - i am sure someone on here will be able to let you know
Perhaps not specific to KR!S but lots of kwak tanks had the same caps so just find out which others are the same - i am sure someone on here will be able to let you know
Smokings Good For You
- JanBros
- Avgas Sniffer
- Posts: 3306
- Joined: Wed Jul 26, 2006 11:50 pm
- Location: the land of Francorchamps
Re: fuel cap
I believe just about any Kwak from those days had the same one.
My ultimate goal is to die young as late as possible !
- gangus
- Smoker
- Posts: 55
- Joined: Tue Mar 22, 2011 10:11 am
Re: fuel cap
got one on the way, listing states that it fits all the kwaka caps with 7 bolt holes.
- 500bernie
- Avgas Sniffer
- Posts: 3398
- Joined: Mon Aug 02, 2010 10:22 am
- Location: Teesside
Re: fuel cap
Don't forget to post a photo, we would all like to see how it looks.
Cheers
Bernie
Cheers
Bernie
Firecracker Red and Grey C3 300
- gangus
- Smoker
- Posts: 55
- Joined: Tue Mar 22, 2011 10:11 am
Re: fuel cap
the cap turned up and fitted!
I like the raw silver as I have seen cheap anodized parts fade in the sun very quickly that friends have bought
the listing was for a zxr400 93-99.
http://www.ebay.com.au/itm/Billet-CNC-S ... SwI3RW8lrT
While I was at it i removed the vacuum tap and fitted one I had laying around of a tz250 and it bolted up just requiring a little clearance mod for the lever. You could run a spacer on the tank if you felt like it but I opted for this. (edit- Just looked on ebay..... little pricey, wouldnt have used it if I knew...)
I like the raw silver as I have seen cheap anodized parts fade in the sun very quickly that friends have bought
the listing was for a zxr400 93-99.
http://www.ebay.com.au/itm/Billet-CNC-S ... SwI3RW8lrT
While I was at it i removed the vacuum tap and fitted one I had laying around of a tz250 and it bolted up just requiring a little clearance mod for the lever. You could run a spacer on the tank if you felt like it but I opted for this. (edit- Just looked on ebay..... little pricey, wouldnt have used it if I knew...)