Page 8 of 18
Posted: Mon Sep 26, 2011 8:21 pm
by headcoats
Uploaded with
ImageShack.us
Uploaded with
ImageShack.us
All welded up now and tried the RGV hanger with the KR1S disc and it all seems to fit but haven't double checked it yet
Uploaded with
ImageShack.us
Posted: Tue Sep 27, 2011 7:57 am
by Garry
Nice work Martin
I'm not an engineer but are you sure the mount will take the forces
involved
Normally they are transmitted along the sides of a triangle not across
them - just looks like it could do with bracing behind the top of the
mount to connect to the existing top brace on the swing arm?
Posted: Tue Sep 27, 2011 8:11 am
by headcoats
Uploaded with
ImageShack.us
I used this design,it has been on Ian Booms LC Hybrid for several years now and as it's the P non banana swinger on his ,it is only welded across the top and not down the front like mine
Posted: Sun Oct 02, 2011 5:00 pm
by headcoats
Uploaded with
ImageShack.us
Thought i would need spacers behind the discs to get them to line up with the calipers but used 2mm thick washers between the caliper and fork mounting holes
looks tight but so are the standard KR1S calipers in the wheel
Posted: Mon Nov 21, 2011 10:03 pm
by headcoats
Progress has been slow but been buying bits and pieces behind the scenes
After seeing what Kennys (TSA) pipes did on the dyno,i'm currently trying to save up to get some
Posted: Mon Nov 21, 2011 10:16 pm
by Luders
Any chance of some more pics?
Posted: Mon Nov 21, 2011 10:25 pm
by headcoats
If the feckin customs haven't stung me i might have a pic of the billet head soon
Posted: Mon Nov 21, 2011 10:26 pm
by Luders
Nice, look forward to it
Posted: Mon Nov 21, 2011 10:48 pm
by Howie
If the feckin customs haven't stung me
Are you going to be on uk border force road war cops with cameras then HC?
Let us know & I'll tape it
Seriously though, what have you done? Allegedly that is.
Posted: Tue Nov 22, 2011 9:32 pm
by headcoats
Posted: Thu Nov 24, 2011 4:53 pm
by headcoats
Uploaded with
ImageShack.us
Uploaded with
ImageShack.us
Uploaded with
ImageShack.us
Posted: Thu Nov 24, 2011 4:56 pm
by Luders
very sexy
Posted: Thu Nov 24, 2011 5:14 pm
by headcoats
Luders wrote:very sexy
Too nice for an LC eh
Posted: Thu Nov 24, 2011 5:14 pm
by Luders
bet you're pleased with that
Posted: Thu Nov 24, 2011 5:34 pm
by headcoats
Apart from the postage and customs it would have been a good deal but yes
Just hope it all works now
They do sell cheaper ones on Ebay called Pro -cool etc but these are meant to fit banshees
This one is made especially for the powervalve and means it just bolts straight on and the standard thermostat housing ,temp sender fits etc and more importantly it keeps the standard barrel studs ,where you have to fit longer ones with the Banshee stuff
