F3 kips valves to be manufactured
-
- Newbie
- Posts: 11
- Joined: Wed Mar 25, 2009 12:38 pm
- Location: Finland
Hi guys!
I'm fresh member at your forum.
I have one of five KR-1 (B1) ever imported to Finland and as far as I know there is only two examples running here both at Helsinki capital city area. No S-versions exist here. Please correct this if I'm wrong. I also have Z1-R for daily runs.
I have been lately working with exhaust chambers and I have now third good version coming for next summer. My aim is beat the stock S-version, not only in weight . I use MOTA for calculations and Rhino for modeling.
My new project is maybe more ambitious one as I am re-designing the cylinders. Now, after modeling phase, I'm looking for right manufacturing process particularly for my project. Later I may expose more about this project if someone is interested. So if you didn't heard this efford later I may screwed up...
I need new set (4) of exhaust valves for my becoming cylinders. If there is still one set to sell I would be very happy to buy one.
How can I send private message for certain member (in case of bank account info etc.)?
Cheers, kr1stian
I'm fresh member at your forum.
I have one of five KR-1 (B1) ever imported to Finland and as far as I know there is only two examples running here both at Helsinki capital city area. No S-versions exist here. Please correct this if I'm wrong. I also have Z1-R for daily runs.
I have been lately working with exhaust chambers and I have now third good version coming for next summer. My aim is beat the stock S-version, not only in weight . I use MOTA for calculations and Rhino for modeling.
My new project is maybe more ambitious one as I am re-designing the cylinders. Now, after modeling phase, I'm looking for right manufacturing process particularly for my project. Later I may expose more about this project if someone is interested. So if you didn't heard this efford later I may screwed up...
I need new set (4) of exhaust valves for my becoming cylinders. If there is still one set to sell I would be very happy to buy one.
How can I send private message for certain member (in case of bank account info etc.)?
Cheers, kr1stian
Kickstart your heart.
-
- Premix Junkie
- Posts: 1804
- Joined: Tue Jun 26, 2007 3:59 pm
- Location: Fourques, France
Hi kr1stian,
welcome to the forum!
To send a pm, just click on the pm button under a member's name.
Charles
welcome to the forum!
yes, still got 4 sets available, so you can have one set, no problem.kr1stian wrote: I need new set (4) of exhaust valves for my becoming cylinders. If there is still one set to sell I would be very happy to buy one.
To send a pm, just click on the pm button under a member's name.
Charles
-
- Premix Junkie
- Posts: 1804
- Joined: Tue Jun 26, 2007 3:59 pm
- Location: Fourques, France
-
- Premix Junkie
- Posts: 1804
- Joined: Tue Jun 26, 2007 3:59 pm
- Location: Fourques, France
They will fit, you just have to use a dremel to widen the KIPS port a bit. I use KR1-barrels too.Leewc wrote:Just to clarify, these won't fit KR1 B2 cylinders will they?
yes, the holes in the valves are different (the KR1S got larger ones). The (external) dimensions of the valves themselves are identical.Leewc wrote:Am i right in thinking they use different size PV's.
cheers,
Charles
-
- Premix Junkie
- Posts: 1804
- Joined: Tue Jun 26, 2007 3:59 pm
- Location: Fourques, France
No, it's not a great job. I've only just found out what this mate of mine is able to manufacture. He can nearly make everything we may come up with: KIPS valves, KIPS levers, clutch stars, etc.Steely wrote:You're doing a great job charles, keep up the good work.
Charles
Last edited by Charles on Fri Oct 16, 2009 4:36 pm, edited 1 time in total.
-
- Premix Junkie
- Posts: 1804
- Joined: Tue Jun 26, 2007 3:59 pm
- Location: Fourques, France
-
- Premix Junkie
- Posts: 1804
- Joined: Tue Jun 26, 2007 3:59 pm
- Location: Fourques, France