KR-1S.co.uk Forum

Hi Fred,
No problem, if Bens is unavailable I can either send mine or have a go at drawing it.
Cheers
Bernie

Not sure where I should be posting this but here goes.

The I/D of the rubber bush will be 8mm and if you need to know any other dimensions, just ask and I'll add them to the sketch.

exelent ,cheers ,sure we can work with that

The rubber mounting parts are welded to the main bracket, so we can disregard that part of the drawing. I'll have a look for some tomorrow.

Unfortunately I don't have a CAD package, so I've had to do this sketch in Paint on my PC, so it's not the best drawing, but it should do the job.

Paint.......
10 out of 10 =D> =D> =D>

Have a look at the bearings and bushes near the bottom of the page.

http://www.gmt.gb.com/product-index.php

hi ben ive just been sent a pdf of the exhaust hanger ,can i send it to you to upload as i havent got a clue,just to check it out,were getting a new amada f1 laser at work so cant cut any till next week now ....

If anyone can find/source these, let either myself or Fred know.

Hi Guys,
I have emailed a supplier, I will let you know what they come back with [-o<

Thanks Bernie, I'm really trying to find a solution too, as these brackets are like rocking horse shit.

I have asked if they have anything on the shelf that may fit with a modification to the bracket [-o<

If you make a batch, I'd be interested in one please.
Ta,
Mike

not long to go now Bernie,
post me the carb slide so I can put it in the ultrasonic cleaner.
as soon as the new jets[pilots and mains]come in the post, your engine will
be finished.

Thanks Martin =D> =D> =D>
That looks fantastic

Wow !!!

I needed my sunglasses on to look at the screen - looks brilliant