here is my project

tescr500 · Post by **tescr500** » Sun Sep 18, 2011 10:38 am

cheers, well i haven't tried plastic welding yet but if this goes wrong thats what i'll be doing, but any ideas on the side cove holes on the upper fairing, i have 1 of the rubber nut mounts,holes that has cracked off, its such a small piece not sure what im going to do with this part.

tescr500 · Post by **tescr500** » Sun Oct 09, 2011 11:46 am

just a bit of spraying came out very good just a bit of flatening and polishing job done and done the clocks to

tescr500 · Post by **tescr500** » Wed Nov 09, 2011 10:52 am

Hi All just a sneak preview of the battle colours, next time you see these colours should be in full dress mode with battle hardware installed, i also recommend have ago at some spraying, i know its 2 pac but its well worth ago and most of all its saved me a fortune and pushed project on, should have engine up and running before xmas and looking at spring early summer ready for a blast, fingers crossed cheers Wayne.

pablo · Post by **pablo** » Wed Nov 09, 2011 10:09 pm

You have to be pleased with those results =D> It looks mint.

When you takin orders.

tescr500 · Post by **tescr500** » Wed Nov 09, 2011 10:18 pm

Hi Pablo, yeah i am over the moon how they are coming out, delighted in fact, takes a bit of elbow grease to get them like that but its bl..dy worth it, cheers wayne.

tescr500 · Post by **tescr500** » Tue Nov 22, 2011 12:02 am

just popped a few more photo's on above, can't believe how well it came out, delighted.

Howie · Post by **Howie** » Tue Nov 22, 2011 12:37 am

That is clean and bloody shiny =D>

Talk about Britains got talent, they should really spend their money making programmes about people like you tes.

In fact that's not a bad idea for a telly programme. Why doesn't anyone inspire the kids (not sure how they like to be refered to nowadays

) or whatever to show their engineering talent or is that not hip(?) enough, bloody kids!
I give up.......

tescr500 · Post by **tescr500** » Tue Nov 22, 2011 6:03 am

Hi Howie, cheers, yeah good idea but i don't think its got enough buttons to press and no wireless controller, bloody kids, coming out very good, spraying went very well just tank and seat unit to do but that'll come later, going to start rebuilding the engine at the weekend but that'll take a few weeks by the time i have cleaned up all casings, plating etc etc cheers wayne.

SP_BOTT · Post by **SP_BOTT** » Tue Nov 22, 2011 9:49 am

Very inspirational

any tips on the spraying, did you spray green over black, or just masked up and put the colour on top of the primer (if you see what I mean)

Have you got a mask etc for the 2pak.

I will have a go at spraying myself, as I've got too many bikes to either get them done professionally, or find NOS parts

Luders · Post by **Luders** » Tue Nov 22, 2011 10:35 am

That's an impressive paint job, well done

tescr500 · Post by **tescr500** » Tue Nov 22, 2011 4:58 pm

Hi Luders, cheers its good to have some good comments cheers wayne

tescr500 · Post by **tescr500** » Tue Nov 22, 2011 5:12 pm

SP_BOTT wrote:Very inspirational any tips on the spraying, did you spray green over black, or just masked up and put the colour on top of the primer (if you see what I mean)

Have you got a mask etc for the 2pak.

I will have a go at spraying myself, as I've got too many bikes to either get them done professionally, or find NOS parts

Hi SP i'll give you all info later cheers wayne

375 · Post by **375** » Tue Nov 22, 2011 5:48 pm

You sure you not put some nos body work on for the photos.

Will have to send you a spare set of bodywork,

tescr500 · Post by **tescr500** » Tue Nov 22, 2011 7:21 pm

Hi 375 no NOS body work but is all original and its turned out very well, i'm chuffed to bits how its come out cheers Wayne.

boggy · Post by **boggy** » Tue Nov 22, 2011 7:45 pm

Are you sure you are in the right job?Looking at those panels you should become a professional sprayer!Top job,my panels are in the post!!!

Rich =D>

KR-1S.co.uk Forum

here is my project

last of the spraying for now anyway